OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Crimp Style = Greater Load Capacity?

Started by Spring Creek Calls, March 19, 2022, 03:03:43 PM

Previous topic - Next topic

Spring Creek Calls

I recently purchased (5) 2-3/4" 28 gauge TSS loads that held 1-5/8 ounce of shot which is what most 3" 20 gauge loads hold. Out of curiosity I started comparing other turkey ammo to these shells, both fired and unfired. I believe the pictures will show how the crimp style allows this, with the roll crimp allowing the extra capacity. The pictures show a 2-3/4" 12 gauge, a 3" 12 gauge and the 2-3/4" 28 gauge. Last 2 pictures are the fired 2-3/4" star crimp and the fired 2-3/4" roll crimp. The roll crimp is longer than the 3" shell unfired and shorter than the 2-3/4" fired.

Sent from my SM-T510 using Tapatalk

2014  SE Call Makers Short Box 2nd Place
2017  Buckeye Challenge Long Box 5th Place
2018  Mountain State Short Box 2nd Place
2019  Mountain State Short Box 1st Place
2019  NWTF Great Lakes Scratch Box 4th Place
2020 NWTF GNCC Amateur 5th Place Box
2021 Mountain State 3rd Place Short Box
2021 SE Callmakers 1st & 2nd Short Box
E-mail: gobblez@aol.com
Website: springcreekturkeycalls.weebly.com

JohnSouth22

I see what your saying but it's not quite correct.  shell  length is nearly  completely determinate on the amount of spacers/filler wads/type of wad in the shell. For example I can technically load 2 5/8 oz of tungsten into my 3 inch hulls if I didn't use spacers and used a different wad. Obviously I shouldn't do this because my PSI would be through the roof and most likely blow up my gun. Shotgun shell recipes are all a fairly delicate balance of fillers & payloads to stay within the recommended PSI for that shell.

Rapscallion Vermilion

Yes, a roll crimp uses slightly less hull than a star or fold crimp, so you can, if ever needed and still meeting safe pressures, fit a taller column of components under a fold crimp for the same length hull. 

zelmo1

Maximum payload doesn't always give the best overall performance. I load TSS in my 28 and 20, I have found that a muzzle velocity of 1180-1220 fps produce the best patterns , for me in multiple guns and various chokes. Just throwing it out there, max payload isn't always the best

WV Ridge Reaper

Quote from: zelmo1 on March 19, 2022, 07:41:46 PM
Maximum payload doesn't always give the best overall performance. I load TSS in my 28 and 20, I have found that a muzzle velocity of 1180-1220 fps produce the best patterns , for me in multiple guns and various chokes. Just throwing it out there, max payload isn't always the best
This is true from my experimenting around as well..I've loaded 383 grains and the shell have a rattle just a little bit..load up 400 grains and no rattle no extra room and it goes down hill majorly.


Sent from my iPhone using Tapatalk