How do you clean your chokes?

[BDeal]

Do most of you use anything special to clean your chokes? Also, how often do you clean them and what is the process?

Thank you!

[Spark352]

Interested in this process as well.

[Bob G.]

I clean the inside of the choke just like the barrel. I clean the outside, lube and install.

[Gmed]

I clean the inside of the choke just like the barrel. I clean the outside, lube and install.

Same here. If the ports get dirty or clogged, I use a solvent soaked brush and Q-tips or one of the little fire channel brushes for muzzleloaders and clean em out....

[eddie234]

Clean my choke when I clean my gun, it get removed and scrubbed with a toothbrush and solvent. Reinstalled and an oil patch run through barrel and choke.


Sent from my iPad using Tapatalk Pro

[SumToy]

Wire brush.   I know some of our target stuff we take a pick and run around the steps. 

[lowoctane]

 
I've got a little different take on chokes with steps and grooves in them: I clean them after every shot as I'm looking for consistency. It's amazing how fouled (fowled) they get after one shot! 

[SumToy]

I've got a little different take on chokes with steps and grooves in them: I clean them after every shot as I'm looking for consistency. It's amazing how fouled (fowled) they get after one shot! 

that is the best way.   Now sometimes they will build the lead in the steps that brush dont get out is why I say pick them

[DMTJAGER]

Soak 4-12 hours in acetone clean with a stiff 10ga phosphorus bore brush lube threads with high quality anti-seize and install. 

[lowoctane]

Soak 4-12 hours in acetone clean with a stiff 10ga phosphorus bore brush lube threads with high quality anti-seize and install.

Acetone will do it!