OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Avian X Decoys leaking

Started by strutter, March 19, 2018, 12:39:30 PM

Previous topic - Next topic

mtns2hunt

Quote from: bbcoach on April 07, 2018, 01:55:56 PM
If you have an Avian X leaking around the screw shank that holds the stake tube on the inside, repair it with super glue.  Release the air pressure from the decoy.  Lay it on it's back, belly up.  Take liquid super glue and deposit 10-15 drops of glue directly in the center of tube on the screw shank.  Leave it belly up overnight to dry.  Reinflate, add a little water in the tube and check for leaks.  Repeat if necessary.  Just repaired a feeding hen that was low on air and the glue took care of the problem.

If my decoys do start to leak I now have all the info to repair. LOL
Everyone wants to be successful - some just need help.

pdaugherty

I've got some of the very first Avians and they started to leak couple years ago. I pulled the valve stem out, inserted the straw on two cans of the Spray Foam sealant and let it expand. Be sure to turn your decoy right side up so that the excess foam can leak out. Once it dries it's solid and can take a hit from a pellet. Only draw back is you'll never deflate them again.

ChiefBubba

Just got an email from Avain-X they're going to replace it no charge. Gotta like that. Bubba

Chick

My Avian X LCD decoy is leaking from the stake hole. I determined that the decoy shell is pvc and I think the stake hole is made from possibly ABS. I poured PVC. Into the hole, and tomorrow.will.poura half inch.of epoxy on top of that. I'll let you know if it works.

hootgobbleyelpgobble

Quote from: Chick on April 25, 2021, 03:49:02 AM
My Avian X LCD decoy is leaking from the stake hole. I determined that the decoy shell is pvc and I think the stake hole is made from possibly ABS. I poured PVC. Into the hole, and tomorrow.will.poura half inch.of epoxy on top of that. I'll let you know if it works.

I patched my POS Avian X's in the same spot last night also.....the dang stake hole meets the decoy is a weak point for sure. Tried JB Weld clearweld quick set epoxy to see if I can get some more life out of them. I have a strutter that has never been used that will not hold air. I don't hunt with decoys much but still want them to work when I decide I need a crutch.