Print Page - barrel chambering

Title: barrel chambering
Post by: thebull on April 28, 2011, 05:48:13 AM

where can i get a barrel chambered for the rem. chokes it is a imp. cylinder barrel now. rem 20ga

Title: Re: barrel chambering
Post by: Hognutz on April 28, 2011, 09:19:19 AM

Find a good gunsmith.

Title: Re: barrel chambering
Post by: redarrow on April 28, 2011, 11:15:26 AM

I would contact Clark here at OG. You can pm him at Allaboutshooting.

Title: Re: barrel chambering
Post by: bowhunter84 on April 28, 2011, 11:24:36 AM

Quote from: redarrow on April 28, 2011, 11:15:26 AM
I would contact Clark here at OG. You can pm him at Allaboutshooting.

:agreed: if anyone would know i bet he would :icon_thumright:

Title: Re: barrel chambering
Post by: Hognutz on April 28, 2011, 11:28:54 AM

Do you want a new barrel, or the existing barrel threaded for Rem-chokes? I think I misread the question..Sorry..

Title: Re: barrel chambering
Post by: Basser69 on April 28, 2011, 12:06:02 PM

Quote from: Hognutz on April 28, 2011, 09:19:19 AM
Find a good gunsmith.

X 2 I had one done a couple of years ago. It will cost ya about $125 or so

Title: Re: barrel chambering
Post by: Reloader on April 28, 2011, 12:21:23 PM

Some bbls require a thin wall system with limited chokes available. The cost is usually as much as just buying a new bbl.

Title: Re: barrel chambering
Post by: WyoHunter on April 29, 2011, 07:08:54 PM

Quote from: Reloader on April 28, 2011, 12:21:23 PM
Some bbls require a thin wall system with limited chokes available. The cost is usually as much as just buying a new bbl.

Good advice!

Turkey hunting forum for turkey hunting tips

General Discussion => General Forum => Topic started by: thebull on April 28, 2011, 05:48:13 AM