Print Page - Ruger 10/22 Bolt Problem

Title: Ruger 10/22 Bolt Problem
Post by: gatrapper on December 30, 2018, 10:24:17 AM

Hey Y'all,

I purchased a Ruger 10/22 off Gun Broker.

I am unable to open the bolt all the way. It only opens 1/4 of the way then hangs up.

How can I fix this problem?

Title: Re: Ruger 10/22 Bolt Problem
Post by: Bowguy on December 30, 2018, 11:07:40 AM

Seems lots do that. Had a few friends w em and they're problematic. They kept messin w it til they succeeded. Getting a magazine in/out was fun too. Call ruger.

Title: Re: Ruger 10/22 Bolt Problem
Post by: Gobspur on December 30, 2018, 12:39:56 PM

Bought new or used?
Does it have a scope or scope mount? One common problem is scope mount screws protruding to far thru the receiver, and interfering with the bolt. Otherwise, I'd try dissasembling and see whats going on. You can find diagrams and videos online of how to take apart.

Sent from my SM-G955U1 using Tapatalk

Title: Re: Ruger 10/22 Bolt Problem
Post by: silvestris on December 31, 2018, 03:01:32 AM

Sounds to me to be overlong scope screws. Easy to check; if it doesn't lock up then, grind or file a bit off the screws until the bolt comes to the back of the receiver and comes back to battery. Be careful not to booger up the threads on the screws.

Turkey hunting forum for turkey hunting tips

General Discussion => General Forum => Topic started by: gatrapper on December 30, 2018, 10:24:17 AM