Turkey hunting forum for turkey hunting tips

Turkey Guns & Shooting => Turkey Guns => Topic started by: BINK McCARTY on March 23, 2017, 02:42:01 PM

Title: Shoot at the proper size target when patterning your gun
Post by: BINK McCARTY on March 23, 2017, 02:42:01 PM
 :z-guntootsmiley: When starting out patterning your turkey rig,shoot at least a 3' x 3' blank paper.... (I personally use 4' x 4') This will not only show you holes you may or may not have in your pattern but also the difference in POI compared to POA!!!!! Also it WILL  show you the fact that not all chokes are created equally....shells as well. Hope this tip helps. Shoot at maximum distance,draw a 10" circle around the most dense portion of pattern then back up in increments of 5 yds.  When you stop puttin 100 pellets in that 10" circle you have essentially reached your maximum killing patterm. Hope this helps!!!!
Title: Re: Shoot at the proper size target when patterning your gun
Post by: Dtrkyman on March 23, 2017, 05:51:37 PM
Agreed, I have seen many guys slap up a shoot n c type target and think there pattern is no good, well you actually just missed the target with the bulk of your pattern!!!
Title: Re: Shoot at the proper size target when patterning your gun
Post by: TrackeySauresRex on March 23, 2017, 07:01:12 PM
You mean to tell me.... I can't put up a paper pie plate like I did way back when.  :funnyturkey:
Title: Re: Shoot at the proper size target when patterning your gun
Post by: owlhoot on March 23, 2017, 07:30:20 PM
Quote from: TrackeySauresRex on March 23, 2017, 07:01:12 PM
You mean to tell me.... I can't put up a paper pie plate like I did way back when.  :funnyturkey:
No you can't.  Barrels are just bent more now,especially on the high dollar guns!   lol 
Title: Re: Shoot at the proper size target when patterning your gun
Post by: TrackeySauresRex on March 23, 2017, 09:34:11 PM
Quote from: owlhoot on March 23, 2017, 07:30:20 PM
Quote from: TrackeySauresRex on March 23, 2017, 07:01:12 PM
You mean to tell me.... I can't put up a paper pie plate like I did way back when.  :funnyturkey:
No you can't.  Barrels are just bent more now,especially on the high dollar guns!   lol

:TooFunny: :TooFunny: :TooFunny: :TooFunny: