Text only | Text with Images

Turkey hunting forum for turkey hunting tips

General Discussion => General Forum => Topic started by: WNCTracker on March 10, 2017, 09:09:42 PM

Title: HELP! What size screws do I need to mount my FF3 on the SBE3!?!
Post by: WNCTracker on March 10, 2017, 09:09:42 PM
I finally have all the pieces in one place. The SBE3, sumtoy mount, FF3, and FF3 protector. I popped the plugs where the barrel is drilled and tapped and when I went to screw in the mount that I got from sumtoy the screws that were included were too skinny?  Any idea what size I need  or, where to get them?  Dang it.


Sent from my iPhone using Tapatalk
Title: Re: HELP! What size screws do I need to mount my FF3 on the SBE3!?!
Post by: the Ward on March 10, 2017, 09:40:43 PM
 As far as  I know all Benelli's use an 8-40 base screw. You probably got 6-48 screws, they are more commonly used on a lot of guns. My Vinci uses 8-40 screws, and it uses the same bases as sbe 2's. I would imagine the sbe 3's are the same. Congrats on the new gun, post up some pics when you get it put together!
Title: HELP! What size screws do I need to mount my FF3 on the SBE3!?!
Post by: WNCTracker on March 10, 2017, 10:01:03 PM
Thanks. I'll check that size tomorrow and hopefully post a picture


Sent from my iPhone using Tapatalk
Title: HELP! What size screws do I need to mount my FF3 on the SBE3!?!
Post by: WNCTracker on March 13, 2017, 09:43:05 PM
For the record the SBE3 is tapped 8-40 just like sbe2


Sent from my iPhone using Tapatalk
Text only | Text with Images