Text only | Text with Images

Turkey hunting forum for turkey hunting tips

Turkey Calls => Call Making => Topic started by: Nickogatli on March 09, 2017, 09:49:59 AM

Title: Lathe Chucks
Post by: Nickogatli on March 09, 2017, 09:49:59 AM
Hey guys, I just wanted to know what kind of lathe chucks  you all like to use? I have been using a screw chuck, and it work alright, but every couple of months we have to change the screw. And sometimes it chips the wood in the center.
Title: Re: Lathe Chucks
Post by: GMM365 on March 09, 2017, 03:59:04 PM
I use a barracuda 2.
Title: Re: Lathe Chucks
Post by: mastevt on March 09, 2017, 08:54:25 PM
Barracuda2  here too.  Bought extra bodies so I dont have to waist time changing jaws.
Title: Lathe Chucks
Post by: MickT on March 09, 2017, 09:29:36 PM
Nova something or other. Just make sure whatever you go with has a set of jaws to grab what you need it to.


Sent from my iPhone using Tapatalk
Title: Re: Lathe Chucks
Post by: Nickogatli on March 09, 2017, 11:43:34 PM
I appreciate all the responses guys! I'll have to check those out!
Title: Lathe Chucks
Post by: southern_leo on March 09, 2017, 11:58:41 PM
Psi economy 4 jaw chuck. Comes with a couple sets of jaws and a screw chuck for around 100

Sent from my SM-N920V using Tapatalk

Title: Re: Lathe Chucks
Post by: misfire on March 10, 2017, 10:32:43 AM
I use two Pinnacle chucks from Woodcraft, one to hold outside of pot and the other to hold the inside
Text only | Text with Images