What do you guys use to clean the insides of your chokes? I just cleaned out one of my IC chokes and it was total crud coming out of it. I got it all out but what kind of chemical do you think would get the crud out easy? I used a dab a of kroil on it and it was OK. Is there anything out there specific for chokes? Thanks
Kevin
hoppes 9 or break free clp, work well for me, saturate the inside and let it sit for 15 minutes and run a bronze brush through it
Mossy, Take some shooter's choice solvent or hoppes no. 9, dip a bronze brush in it, run in through the choe a few time to loosen the crud up, and get you some aerosol brake cleaner from wally world, auto parts place, etc. and spray it out. Wipe dry if needed, works like a charm!!!! :icon_thumright:
Thanks to both of yall!
I soak my dirty chokes in Acetone which really helps dissolve that nasty plastic residue that can build up in the wad catching rings and ports.
A few passes with denatured alcohol or Shooters choice is all that's needed to finish cleaning my chokes.
Should be able to just brush it every few shots. Now if you let it build you will need to clean it with something else.
I like using Kroil on a brush.
Brass brush and hoppes
i use Shooters Choice or Butches a brush and pipe cleaners on all my chokes
Take a look at a product called choke shine. They sell it on the Trulock Choke site.
Quote from: VAHUNTER on April 08, 2011, 02:07:58 PM
i use Shooters Choice or Butches a brush and pipe cleaners on all my chokes
me too. shooters choice with a brass brush.. then follow it up with hoppes os somethin not that powerful.. gets all plastic outta choke and always clean ur ports with pipe cleaners