Need choke recommendations for my Browning Gold 20 ga . with Invector Plus . I just bought a Trulock flush mount and I'm not too impressed with my numbers . 117 in 8" circle at 40 yds with Federal Heavyweights #7's
Quote from: pdugas on March 13, 2016, 05:28:41 PM
Need choke recommendations for my Browning Gold 20 ga . with Invector Plus . I just bought a Trulock flush mount and I'm not too impressed with my numbers . 117 in 8" circle at 40 yds with Federal Heavyweights #7's
Did you check your 10" numbers? I have an invector barrel, and shoot the SSX .550. With my Mossberg, I got 152 in the 10" at 40 with federal Heviweight 3-1.5-7's.
10" wasn't much better
If I was shooting that shell I would got with a Sumtoy choke. I believe I read somewhere his choke did well with SX3 20 gauge, with the same choke system as your Gold.
117 in an 8 " circle equates to 146 in the 10 and that is pretty close to outstanding. Wise owl says check it at 30 before looking much further for chokes. You may be surprised.
Most of my turkeys aren't seen until inside or at 50 yards and then it is a rare shot over 30 for me.
That's pretty darn good for an 8" count.
If you want tighter, try the Primos TW .570. It shoots too tight with HW 7s for me in my SXP and SX3(same bore and choke as yours).
get an Indian Creek Midway USA have them on sale
Not bad with that at all. You'll do just fine with that rig. My boy has the same choke in his BPS and does well with similar numbers.
Thanks for the info guys