So I got to sanding and cutting on the end of a striker and cant get the thing to produce decent sound again. Any tips on how to fix???
I did that once. Learned my lesson, buy another one. :anim_25:
What was the purpose for cutting it off?
Yelper is probably right.
I have sanded the stem down and have sanded the tips down from a mushroom tip but never cut one off. I think cutting the length most likely ruined the striker. good luck and take it as a learned lesson. hopefully it wasn't a expensive striker.
I agree with the above post. How much did you cut off? The length is very important.
I just cut about a 1/4 inch.
+1
Quote from: Yelper on February 17, 2016, 11:24:51 AM
I did that once. Learned my lesson, buy another one. :anim_25:
I have an Alex Williams Ipe Striker that I sanded the mushroom tip down to a straight tip, I like it better now!
Quote from: kevfish on February 18, 2016, 10:41:47 AM
I just cut about a 1/4 inch.
1/4" can make a huge difference. Sometimes good, sometimes bad.
The first striker that I tried to make was a 6" red cadar turned out good I could use it on my calls
I lost in the woods sooooo I'm going to try and make another .
I think it's the striker as a hole the DIAMITER of the striking end .......
One of my favorite strikers of all time was a Primos Power Striker..that peg on a Power Crystal was amazing. I wish I knew how many birds I called up with that combo...anyway something got on it...probably Deet and it never was the same. cut sanded you name it...it never worked again :'(
If you are still running it on that power crystal, it's probably time for a new call. Deet would more than likely just mess with the finish on it. Those power crystal are known for playing good for a few years then all of a sudden going dead.
Quote from: M Sharpe on February 19, 2016, 06:14:52 PM
If you are still running it on that power crystal, it's probably time for a new call. Deet would more than likely just mess with the finish on it. Those power crystal are known for playing good for a few years then all of a sudden going dead.
I believe their issue is with the soundboard, not the finish but could be wrong. Has happened once or twice.
Yep, plastic doesn't have a so-call finish on it. He's done sanded and everything else. It's just a dead call.....which like I say, was quite common for them.