What is the best method to preserve a gobbler fan ? I brought my 1st fan to my taxidermist but I want to try my second myself. How long does it typically take to dry. I watched a you tube video last night and now have a general idea, but any tips are welcome.
Thanks,
Cody
Cut off as much meat as possible then use 2 nails to spread it out. Add a dash of salt and wait a month or so
I've followed the directions on the NWTF website:
http://www.nwtf.org/tips_adventures/tips.php?id=289
It's a pain but the results have been good.
I would use Borax rather than salt.
Quote from: Gobble! on March 24, 2011, 10:26:02 PM
Cut off as much meat as possible then use 2 nails to spread it out. Add a dash of salt and wait a month or so
thats how i have done mine in the past
Quote from: Gobble! on March 24, 2011, 10:26:02 PM
Cut off as much meat as possible then use 2 nails to spread it out. Add a dash of salt and wait a month or so
:agreed: I have used both salt and borax, and both work well.
Borax will help keep bugs out of it, too. I just swap out the "borax mound" every week for the first couple of weeks, and then let it sit for a few months. Heck, I have a few that have been pinned down and drying for nearly two years now. :)
Really easy to do. I like cardboard the best and usually use 1-1/2" 18ga nails. Remove all the meat you can, put one nail in the center of the base, pin both bottom feathers so they are flat across for the half moon shape, then place each feather where you want them. Some fans will pin out with ease, some take a bunch of nails, just be sure you have it exactly the way you want it before you leave it to dry. When I'm done pinning it out, I pour a pile of powder laundry detergent on the base. Wait 3-4weeks, blow off the detergent and spray paint the base on both sides. Epoxy works as well. If you don't paint them, bugs can still get on them even after years(even in your house).
I pin the feet out as well so that each toe is symetric with the other foot. After dry I paint the part of the leg that was originally colored, not the pad or claws. Then clear coat the legs.
I've probably done about 15 this year, but not all were fans. You can leave the feet and fans in the freezer for a couple years before pinning them out if needed. I had a guy bring his son's fan/feet/beard to me a while back, he had put the fan in the freezer, but left the feet out. I had to soak those feet in water for a while to be able to move the toes and they were still stiff, but I managed to get them just right and let them dry again.
Here's a couple I've done:
(http://i2.photobucket.com/albums/y26/Reloader01/DSCN0746.jpg)
Some feet ready to go:
(http://i2.photobucket.com/albums/y26/Reloader01/DSCN0752.jpg)
(http://i2.photobucket.com/albums/y26/Reloader01/MVC-005S-2.jpg)
(http://i2.photobucket.com/albums/y26/Reloader01/MVC-009S-2.jpg)
those look good :icon_thumright: :icon_thumright:
Quote from: Reloader on March 25, 2011, 11:07:04 AM
Really easy to do. I like cardboard the best and usually use 1-1/2" 18ga nails. Remove all the meat you can, put one nail in the center of the base, pin both bottom feathers so they are flat across for the half moon shape, then place each feather where you want them. Some fans will pin out with ease, some take a bunch of nails, just be sure you have it exactly the way you want it before you leave it to dry. When I'm done pinning it out, I pour a pile of powder laundry detergent on the base. Wait 3-4weeks, blow off the detergent and spray paint the base on both sides. Epoxy works as well. If you don't paint them, bugs can still get on them even after years(even in your house).
I pin the feet out as well so that each toe is symetric with the other foot. After dry I paint the part of the leg that was originally colored, not the pad or claws. Then clear coat the legs.
I've probably done about 15 this year, but not all were fans. You can leave the feet and fans in the freezer for a couple years before pinning them out if needed. I had a guy bring his son's fan/feet/beard to me a while back, he had put the fan in the freezer, but left the feet out. I had to soak those feet in water for a while to be able to move the toes and they were still stiff, but I managed to get them just right and let them dry again.
Here's a couple I've done:
(http://i2.photobucket.com/albums/y26/Reloader01/DSCN0746.jpg)
Some feet ready to go:
(http://i2.photobucket.com/albums/y26/Reloader01/DSCN0752.jpg)
(http://i2.photobucket.com/albums/y26/Reloader01/MVC-005S-2.jpg)
(http://i2.photobucket.com/albums/y26/Reloader01/MVC-009S-2.jpg)
Very Nice ! Thanks for the tips guys. :icon_thumright:
Here's a video how to hang it up. Anybody use this method?
http://www.customfeathers.com/dryingTailFan.htm
Very nice.
I bought a fan span I think it is called at the NWTF convention a couple of years ago. They are slastic things that hold the fan spread out and you can hang it up to dry. They were 3 for $10 I think. They work great.
NWTF instructions are essentially the same as most other responses (ie use Borax for one month) but include a few other steps including soaking the attached meat in white gas for a short period of timeat the beginning of the process. Don't know if it is necessary but it does work.
And here is the finished product:
[attachment deleted by admin]
Just kidding. That one got a little wet / damaged in the field and was not mountable.
Here is the real product
[attachment deleted by admin]
I posted this in the taxidermy section a while back. It includes photos of the entire process including the cape. You don't have to take all the steps that I do to clean, but it will get you moving in the right direction. The bondo method keeps you from waiting for it to dry and is quite simple.
http://oldgobbler.com/Forum/index.php/topic,1191.0.html
I had photos of just a fan before the site crashed a while back. I haven't taken the time to put that all back together. Someone did have it all copied and made into a pdf that they were kind enough to send me. If I can find it, I can email it to you.
Quote from: kj on March 25, 2011, 01:49:25 PM
NWTF instructions are essentially the same as most other responses (ie use Borax for one month) but include a few other steps including soaking the attached meat in white gas for a short period of timeat the beginning of the process. Don't know if it is necessary but it does work.
And here is the finished product:
I was gonna say.....you might want to read the directions again :TooFunny:
Here ya go, photos from beginning to end.
http://oldgobbler.com/Forum/index.php/topic,5471.0.html
By the way.......a wet fan as shown above can be fixed by washing, soaking in gas, and drying with a blow dryer until completely dry and spread back out. It isn't unmountable unless you actually destroy the feathers.........just ugly until cared for properly.
Thanks hobbes, I know you can dry out a wet fan. Mine was my first bird last year. He had a nice tail and split beard but no spurs to speak of. I shot him just as the drizzle turned to a nasty storm so he got a little beat up hiking out in the rain. I wanted to try to mount a fan anyway so I froze the fan in a tube sock. In the meantime I was lucky enough to shoot a real stud as number 2 with a creme edged fan, longer beard and nice hooks. So I mounted him first. I then went back to the first tail, had the result in the picture and decided the fan wasn't worth the effort.
I tossed one this winter myself after getting it out and it looking like more effort that it was worth.