Hi guys I'm new on the forum. My name is Roger McDonald and I'm from Kentucky. Also I got a new Stoeger M3500 and I was wanting to know what we're some of the best Aftermarket choke tubes/Shell combos. Has anyone had an experience with the Carlson's Long Beard XR :funnyturkey:
:welcomeOG:
I have no experience with the Stoeger you got but I know there are alot of guys here that do and will point you in the right direction.
:wave: :welcomeOG: :anim_25:
Welcome to old gobbler
Welcome!
Thanks
Welcome. You're gonna like this place. Lots of good people willing to help other turkey hunters.
Good to have you aboard Roger! :welcomeOG:
:wagon: :welcomeOG: :wagon: I have a stoeger 3500 and use a Jellyhead (.655 I do believe) with the federal turkey thug 3.5in mags size 6 and love it. Its always a toss up when I have to choose between taking it or my 870 (usually lean towards the 870 bc of sentimental reasons). Hope this info helps you and good luck this season.
Welcome to OG! I have a Stoeger 3500 doing 275 in 10" at 40 with .665 Jellyhead and 3.5 in WinLongbeard 6's. It also does well with Mag Blends.
Welcome aboard
Welcome!!!
:wagon: :welcomeOG: Get the thread pattern and go with what you see here. Most chokes have been reviewed on here. Good luck
Welcome!!
:welcomeOG:
:welcomeOG: :wagon: I'm not familiar with your gun, but I'm sure someone on here will answer your question.
:welcomeOG:
from Mississippi!
Quote from: Mike Honcho on March 26, 2015, 09:43:21 PM
Welcome to OG! I have a Stoeger 3500 doing 275 in 10" at 40 with .665 Jellyhead and 3.5 in Win Longbeard 6's. It also does well with Mag Blends.
Thanks for the info, I went this morning and bought the hev-shot choke tube for my gun. I bought a couple of boxes of the winchester longbeards 6's I hope I can get around 275 with my set up. That's a awesome pattern at 40 yards. Thanks again
I've been looking for a good copper pot call has any one tried Lights Out Custom Call. I've heard he makes a awesome one in the Osage wood.
Quote from: kyturkeyhunter4 on March 27, 2015, 02:17:32 PM
I've been looking for a good copper pot call has any one tried Lights Out Custom Call. I've heard he makes a awesome one in the Osage wood.
Cant speak for his copper but I have his Glass Ceramic, and just ordered a slate, and a glass off him and cant wait to get them. Fantastic call maker. My copper call was made by Mike Yingling and it is awesome.....
Welcome aboard...and enjoy your visits. Magnum Blend.... without a doubt... and I like the Jellyhead. Have fun working out this "problem". :-)
Welcome, you just found the best Turkey sight on the web !!
There is a tremendous amount of advice and knowledge shared here and in a gentlemanly manner at that.
:turkey:
Quote from: tomstopper on March 27, 2015, 02:24:23 PM
Quote from: kyturkeyhunter4 on March 27, 2015, 02:17:32 PM
I've been looking for a good copper pot call has any one tried Lights Out Custom Call. I've heard he makes a awesome one in the Osage wood.
Cant speak for his copper but I have his Glass Ceramic, and just ordered a slate, and a glass off him and cant wait to get them. Fantastic call maker. My copper call was made by Mike Yingling and it is awesome.....
Thanks for the information, how would I go about looking at his calls.
:welcomeOG: :wagon: :welcomeOG: :wagon: