I took a shot to check my pattern yesterday and there was 30 less pellets than lastyear. The temp was right around freezing. Would I gain those 30 pellets in warmer temps or do I need to do more tinkering? They were the same rem hevi shells that I was shooting lastyear and same choke also.
3*n(T2-T)/(.05*n+100)+6=Y
This should get you real close it has for me
Where
n= The number you got today
T= Temp the day you got n
T2= Temp at which you want to know
Y= # at T2 temp
I have seen a increase in just 10 to 12 degrees make a big difference in the way the patterns improved from shooting in 60 degree temp to 72 degree.
If you have a large variance in your pattern say from 35 to 80 deg. then yes IMO keep working
with chokes to get a consistant pattern in the temp range above.20 to 30 hits is exceptable for me
in that temp range.
Quote from: shootumindaface on March 24, 2011, 12:12:54 AM
3*n(T2-T)/(.05*n+100)+6=Y
This should get you real close it has for me
Where
n= The number you got today
T= Temp the day you got n
T2= Temp at which you want to know
Y= # at T2 temp
Shootum,
Ive done the math several times and this formula seems not to work?
n= 195 pellets
T= 60 degrees
T2= 75 degrees
And for "Y" im getting 85 pellets?
Jim
This is in the ballpark of what some have said on here, but there are other weather factors that will affect the pattern:
Higher Temp = HT
Pellet count at the Higher Temp = PHT
Lower Temp = LT
Pellet count at the Lower Temp = PLT
PLT = PHT/(100+((HT-LT)*.875))*100
Or
PHT = PLT*(100+((HT-LT)*.875))/100
In cool air it will be thicker and alot of time it will be damp. Now on the target guns we will go smaller on the chokes. Keep barrel dry. Now with hunting gun don't know how you would keep it dry.