Text only | Text with Images

Turkey hunting forum for turkey hunting tips

Turkey Calls => Trumpets / Wingbones Forum => Topic started by: FinBonZ on June 30, 2014, 06:32:30 PM

Title: wingbone sander question
Post by: FinBonZ on June 30, 2014, 06:32:30 PM
(http://i363.photobucket.com/albums/oo79/iacloaca/2012%20FinbonZ/2014%20FinBonZ/sander3_zps5bd75b69.jpeg) (http://s363.photobucket.com/user/iacloaca/media/2012%20FinbonZ/2014%20FinBonZ/sander3_zps5bd75b69.jpeg.html)
Above is the attachment I have been using to sand my wingbones.  After a few years is getting worn down and I can't find a similar one to replace it.  What do you guys use to sand down your wingbones?   
Title: Re: wingbone sander question
Post by: callmakerman on June 30, 2014, 07:19:05 PM
I'm pretty sure you can get the flapper sanding drums for a Dremal tool.
Title: Re: wingbone sander question
Post by: M Sharpe on July 03, 2014, 09:01:30 PM
Elbow grease!!!
Title: Re: wingbone sander question
Post by: West Augusta on July 04, 2014, 09:24:34 AM
I don't make wingbones but these look the same.

http://www.browntool.com/Default.aspx?tabid=255&CategoryID=255&List=1&Level=a&SortField=ProductName,ProductNumber
Title: Re: wingbone sander question
Post by: Bigspurs68 on July 05, 2014, 11:20:06 PM
I use the foam core drywall sanding blocks.
Title: Re: wingbone sander question
Post by: SCGobbler on July 06, 2014, 09:52:00 PM
I have use 0000 steel wool and then if I want it super shiny, I use a buffing wheel on my dremel with jewelers rouge.
Text only | Text with Images