Turkey hunting forum for turkey hunting tips

Turkey Guns & Shooting => Turkey Guns => Topic started by: troutfisher13111 on March 14, 2014, 08:18:10 AM

Title: What choke are you guys using with Fed HW?
Post by: troutfisher13111 on March 14, 2014, 08:18:10 AM
Ok, since the Federal Heavyweight stuff is ten times easier to find around here, I am thinking about switching over from Hevi-13. What chokes are you guys using that shoot the Fed HW #6's?

For the record, I shoot a 870SM with a 23" barrel.
Title: Re: What choke are you guys using with Fed HW?
Post by: BandedSpur on March 14, 2014, 09:20:44 AM
Can't speak to the choke, but why shoot 6s unless state law requires it? The 7s have way more penetration than you will ever need and lots more pellets, i.e. better patterns to boot. They are a whole different animal from HS 7s.
Title: Re: What choke are you guys using with Fed HW?
Post by: Fullfan on March 14, 2014, 09:23:48 AM
I have tried them all, the factory full choke for my Remington's with the 21" barrel would do 140-150 at 40. I bought one of George Truelocks chokes, it was built for the #7 Heviweights. I can do 150-160 with the #6's. But the #7 will put up 180's
Title: Re: What choke are you guys using with Fed HW?
Post by: bawana on March 14, 2014, 02:58:35 PM
Quote from: Fullfan on March 14, 2014, 09:23:48 AM
I have tried them all, the factory full choke for my Remington's with the 21" barrel would do 140-150 at 40. I bought one of George Truelocks chokes, it was built for the #7 Heviweights. I can do 150-160 with the #6's. But the #7 will put up 180's

X2 I've got the 23 in barrel
Title: Re: What choke are you guys using with Fed HW?
Post by: wvnut3 on March 14, 2014, 05:15:01 PM
X3
Title: What choke are you guys using with Fed HW?
Post by: reynolds243 on March 14, 2014, 05:41:49 PM

Quote from: Fullfan on March 14, 2014, 09:23:48 AM
I have tried them all, the factory full choke for my Remington's with the 21" barrel would do 140-150 at 40. I bought one of George Truelocks chokes, it was built for the #7 Heviweights. I can do 150-160 with the #6's. But the #7 will put up 180's

I didn't think the factory full (for most all guns) is not rated for anything other then lead? I could be wrong but I know that's the case on my benelli and franchi guns
Title: Re: What choke are you guys using with Fed HW?
Post by: Fullfan on March 14, 2014, 09:02:03 PM
Quote from: reynolds243 on March 14, 2014, 05:41:49 PM

Quote from: Fullfan on March 14, 2014, 09:23:48 AM
I have tried them all, the factory full choke for my Remington's with the 21" barrel would do 140-150 at 40. I bought one of George Truelocks chokes, it was built for the #7 Heviweights. I can do 150-160 with the #6's. But the #7 will put up 180's

I didn't think the factory full (for most all guns) is not rated for anything other then lead? I could be wrong but I know that's the case on my benelli and franchi guns

Mine shot fine, but I only ran about 6 shots through it.
Title: Re: What choke are you guys using with Fed HW?
Post by: HogBiologist on March 14, 2014, 09:14:57 PM
As long as it is rated for steel, factory full flush works great.  I can get killing patterns in my NEF single shot fixed modified choke. Killed a bird at a fudge factored 45 yds. Unintentional long range, but I knew I was inside my limit.
Title: Re: What choke are you guys using with Fed HW?
Post by: Longshanks on March 14, 2014, 09:31:48 PM
Hastings .665 200+ in a 10 @ 40 (non ported polished)