Text only | Text with Images

Turkey hunting forum for turkey hunting tips

Turkey Guns & Shooting => Turkey Guns => Topic started by: agturkey on March 13, 2011, 09:13:42 PM

Title: Parts went flying on benelli
Post by: agturkey on March 13, 2011, 09:13:42 PM
Have a SBE II shot today was in shop cleaning when the Carrier Spring and Bolt Latch pin went flying...now I am minus a 243F washer....anyone else ever had this happen...one little washer and now I am waiting to contact Benelli.   I was doing a general clean up on trigger went parts went flying....searched on hands and knees for two hours...no luck.
Title: Re: Parts went flying on benelli
Post by: gooblnfever on March 13, 2011, 09:16:13 PM
 :o :o thats a bummer
Title: Re: Parts went flying on benelli
Post by: sugarray on March 13, 2011, 09:30:32 PM
Get a magnet and sweep the floor and everything.
Title: Re: Parts went flying on benelli
Post by: hookedspur on March 13, 2011, 09:34:29 PM
Quote from: sugarray on March 13, 2011, 09:30:32 PM
Get a magnet and sweep the floor and everything.
:agreed:
Title: Re: Parts went flying on benelli
Post by: spur collector on March 13, 2011, 09:44:51 PM
hope you can get it fixed before the season, good luck
Title: Re: Parts went flying on benelli
Post by: allaboutshooting on March 13, 2011, 10:02:34 PM
Quote from: agturkey on March 13, 2011, 09:13:42 PM
Have a SBE II shot today was in shop cleaning when the Carrier Spring and Bolt Latch pin went flying...now I am minus a 243F washer....anyone else ever had this happen...one little washer and now I am waiting to contact Benelli.   I was doing a general clean up on trigger went parts went flying....searched on hands and knees for two hours...no luck.

Mann & Son Sporting Goods (Since 1946) at 618.357.2911 will have that part or any other part for your SBEII that you need. Just ask for Dustin, he's the parts man.

Thanks,
Clark
Title: Re: Parts went flying on benelli
Post by: BOFF on March 13, 2011, 10:45:40 PM
BUMMER!!

I'm sure you will find it. It might be a while, but it's got to be somewhere.



God Bless,
David B.
Title: Re: Parts went flying on benelli
Post by: bowhunter84 on March 13, 2011, 10:48:34 PM
i hate to hear that. i hope you get it back together before the season starts
Title: Re: Parts went flying on benelli
Post by: agturkey on March 13, 2011, 11:38:37 PM
I guess it just slides in to little groove when I get replacement to keep spring in place?

It is a very small washer not sure if it is plastic or metal...I just know I am hunting it...I went out and looked again for another hour no luck...Thanks for the help
Title: Re: Parts went flying on benelli
Post by: hookedspur on March 13, 2011, 11:47:13 PM
Dont wait give Clark's guy a call.
Title: Re: Parts went flying on benelli
Post by: ghillie on March 14, 2011, 11:55:34 AM
Did it happen to fall into the trigger mechanism??  I'd also try a magnet areond the area you were working on it...hope it comes together for ya!! 
Title: Re: Parts went flying on benelli
Post by: VAHUNTER on March 14, 2011, 02:03:26 PM
yea thats not good at all!!! hard to tell where in the heck it flew to. i would try Ray's suggestion
Title: Re: Parts went flying on benelli
Post by: Hognutz on March 14, 2011, 03:29:41 PM
I would order one, first. Get the ball rolling as per Clark's suggestion. Then you will for sure find it and have a spare. It's not like it will cost an arm and a leg..Good luck..Mike
Title: Re: Parts went flying on benelli
Post by: Basser69 on March 14, 2011, 04:28:11 PM
Man I hate to hear that! Hope it all works out for ya.
Title: Re: Parts went flying on benelli
Post by: agturkey on March 14, 2011, 08:30:37 PM
Benelli sending new one under warranty.

Thanks for all the help!
Text only | Text with Images