Does anyone know if there is a speedbead that will fit the new a300 outlander?Not sure if it will interchange with other model berettas.My wife and I bought one for our son as a combination h.s grad/eagle scout gift and he was thinking he'd like to have one to use for turkey hunting and leave on for wingshooting.We are very impressed with that gun,rock solid and shoots and handles very nicely.If anyone is looking for a reasonably priced gas auto I highly recommend checking these out.Thanks for any info!.......ward
We don't currently make one for that model but we haven't tried fitting any of our current models either so I'm not 100% sure.
Thank you Mr Burris for the reply!The gun receiver is a lot like the 390/3901 series,but I've heard it copies a lot of stuff from the 400 series also.It only came with one stock adjustment shim already installed on the gun,so if i find out what shims it takes it may point me in the right direction.If you find out anything in the future please let me know.Thanks again!....ward
We are in the process of finding out the differences between the 2 guns as well so I will update you when I get word back about this.
You da man!Thanks for the update,i will keep an eye out for your results......ward
Any news on this? I'm having the same problem finding a mount for my outlander to use a reflex sight also.
Thanks!
No news as of yet, but I was over on shotgunworld in the beretta forum awhile back and from what I gather a lot of parts interchange between the 400,390 and 391,so I'm guessing the shims are probably the same but I have not verified this.I have too many other projects going on right now so this is on my backburner lol!Might want to check with Burris optics here on the forum or maybe Beretta themselves.I do know we love our a300,it's a great gun.Good luck and welcome to O.G!...ward
Hey thanks for the welcome! From what I've been able to track down a jpoint/docter mount that mounts to the rib in front of the receiver will work but may require gun smithing I can not verify this though. The last I spoke with burris there was nothing available either. Though I do not know of the interchangeability of other beretta models. Also I've managed to track down a B-square mount that clamps to the rib in front of the receiver, I've yet to speak to anyone wether this will work but I'm tempted to purchase one and give it a try! :fud:
Cool!Let me know how it works out if you go that route.The receiver on these seem to be pretty thick on top so a drill and tap job and rail should work too,although I don't know if anyone has attempted doing this on an a300 yet.
Update. Received the B-Square mount in the post today via CTD. Appears to have mounted up firmly, easy install, simply clamps to the vented rib, also has 4 set screws(2 on ea side) to allow for proper alignment down the rib. Will accept any weaver type optic. :smiley-char092:
This is the B-Square universal cantilever rib mount. Pt#16175
Also here is a pic.
Cheers!
(http://i300.photobucket.com/albums/nn38/crueeldude13/F043942A-0A1B-4016-B9C9-343B40AB0579.jpg) (http://s300.photobucket.com/user/crueeldude13/media/F043942A-0A1B-4016-B9C9-343B40AB0579.jpg.html)
Looks good!Are those model specific in regards to rib width or do they fit any width rib? Have you decided on what sight are you going to use?
Thanks! It fits any rib width up to 3/8".
I was interested in the sightmark qd reflex sight, the gentleman at my local academy sports recommended the Truglo as far as quality. He stated he's had a lot of the sightmarks comeback with internal damage from recoil, as opposed to literally none on the truglo. And the truglo was 30$ cheaper!
Complete setup just under 150$ can't complain at all.
(http://i300.photobucket.com/albums/nn38/crueeldude13/721C4819-1728-4917-8841-B410669AE4D4.jpg) (http://s300.photobucket.com/user/crueeldude13/media/721C4819-1728-4917-8841-B410669AE4D4.jpg.html)
Thanks for the info and pics!Have you decided on a choke and load to try yet?Keep me posted on your progress if ya can.Definately going to look into that mount.I was looking at a similar mount called the rib rider,i think aimtech makes them.They only show them for mossbergs and remingtons though,i would have to measure the rib width on the beretta to see if they would fit.Thanks again...ward
Hey no problem man, there's just not a lot of info avail on the outlander accessories yet, I hope there's more to come I love the gun. As for chokes I'm going with a set of Carlson waterfowl that should be here today or Monday, as for the loads honestly I'll shoot anything that works haha, I have win supreme steel, blackclouds, kent fast steel, federal bb and a few hevi shots in my blind bag. I don't care for the blindsides they suck without a blindside choke. I like mostly #3 shot, but I'm always open for others experience on that as well. Some prefer 2's some 3's some 4's. Since I'm just now learning I'm left eye dom but rh shooter I hope to see improvement with my shots and thus figure out a overall best shot load for me. Oh and the beretta has a 1/4" rib.
I have been told that the Speedbead for the Beretta A400 Xplore will work with this gun. The part number is 410677.
Awesome!Thank you so much Sir for the info.Merry Christmas to you and yours! :candycane:
I bought this (mount) off of eBay for $40 shipped. The packaging said it was for an A391. I bought it because I have a Walmart A390 with a camo A391 youth stock. I have short muscular arms. Anyway, it didn't think about the squareback until I started to mount it and realized that it was not going to work on my model. Should work fine on a 390 without the squareback. BTW, I love that gun. I knew if it didn't fit I could get what I paid for it. I also knew that I was going to try it on my son's A300. It appears to fit very well on the A300. We haven't had a chance to take it to the range but I don't think there will be any surprises at the range. The first pic is my son's A300 with my A391 youth stock mounted on it and of course the second pic is the Speedbead mounted on his A300.
Not sure what we will use it for cause he has a Super Nova that he will use for turkey. He might try it at the range just for kicks.
(http://www.stacgang.org/tradarcher/391.jpg)
(http://www.stacgang.org/tradarcher/a300.jpg)
Thank you for the info and pic!And............... :wagon:
FYI I have decided to sell the Speedbead mount if anyone is interested. I'll do $35 shipped.