Just wondering what type of ink you guys use to sign your calls with. I'm having trouble with the ink bleeding and spreading into the wood. Thanks
I use a G2 Pilot. I cover my calls with boiled linseed oil and then wipe them dry, sign the call and then spray a very light coat of Deft, let it dry. Second coat is also a light coat, let it dry. Third coat I spray a little heavier. Fourth coat is a good coat and so on until I think its good. Let the ink dry good and then lightly coat the call for the first couple of coats.
Archival ink from any hobby store.
TRKYHTR
Pilot g2 here as well
Pilot G2 in the .07mm (medium) size. I have used it on bare wood and after using sanding sealer. I would allow the ink to dry for at least 30 minutes before applying any additional finish. I like to have a fan blowing on my pots after I sign and between each coat of Deft.