Text only | Text with Images

Turkey hunting forum for turkey hunting tips

Turkey Guns & Shooting => Turkey Guns => Topic started by: sugarray on April 04, 2012, 11:05:53 PM

Title: Changing end caps
Post by: sugarray on April 04, 2012, 11:05:53 PM
I bought a new end cap at GM that has a swivel stud.

If I change the caps, tighten down 3-4 clicks, do you think my POI will change?
Title: Re: Changing end caps
Post by: allaboutshooting on April 04, 2012, 11:35:29 PM
Quote from: sugarray on April 04, 2012, 11:05:53 PM
I bought a new end cap at GM that has a swivel stud.

If I change the caps, tighten down 3-4 clicks, do you think my POI will change?

What kind of gun?

Thanks,
Clark
Title: Re: Changing end caps
Post by: sugarray on April 05, 2012, 08:35:52 AM
MB 835
Title: Re: Changing end caps
Post by: runngun on April 05, 2012, 12:35:51 PM
No, I have done it several times with no problems. But I shot them afterwards just for piece of mind!!!
Title: Re: Changing end caps
Post by: chatterbox on April 05, 2012, 03:46:11 PM
I have a similar question.
I took off my barrel to clean it after my final dial in and when I put the barrel back on, the marks to line up were hard to see. I think I am close to where I was but not positive.
Think I'm ok?
Title: Re: Changing end caps
Post by: allaboutshooting on April 05, 2012, 06:26:49 PM
Quote from: sugarray on April 05, 2012, 08:35:52 AM
MB 835

It's doubtful but anything can happen with turkey guns. I'd shoot one shell just to make sure you're still where you need to be.

Thanks,
Clark
Text only | Text with Images