Print Page - What gauge brush to get for 935?

Title: What gauge brush to get for 935?
Post by: JustinM on February 24, 2011, 11:25:31 PM

Hey, so i decided to give barrel polishing a try but im stumped on what to get. I plan on buying a SHOTGUN BARREL POLISHING FLEX HONE from Brownells, but not sure which gauge to get it in for my Mossberg 935 with it being overbored. So should i get the 10 gauge brush, or the 12 gauge brush. Thanks your info will be greatly aprreciated.

The polishing flexhone. http://www.brownells.com/.aspx/sid=2761/pid=647/Product/Flex_Hone__12_Gauge_Fine_Bore

Title: Re: What gauge brush to get for 935?
Post by: SKFOOTER on February 25, 2011, 12:44:18 AM

Go with the 10 gauge brush.

Title: Re: What gauge brush to get for 935?
Post by: S.C.C on February 25, 2011, 07:02:54 AM

Been lookin at those also for a couple years,but haven't tryed them yet.Let us know how they work out for your brl... :icon_thumright:

Title: Re: What gauge brush to get for 935?
Post by: Old Gobbler on February 25, 2011, 07:47:00 AM

Be careful with that tool , it works very fast, and make sure you do not run it over any gas ports it can "ring out " a barrel like that -its happened to people before .

Title: Re: What gauge brush to get for 935?
Post by: Ctomp1974 on February 25, 2011, 07:52:53 AM

Quote from: Old Gobbler on February 25, 2011, 07:47:00 AM
Be careful with that tool , it works very fast, and make sure you do not run it over any gas ports it can "ring out " a barrel like that -its happened to people before .

X2!!

Title: Re: What gauge brush to get for 935?
Post by: bbcoach on February 25, 2011, 08:11:09 AM

The SAFEST and least expensive polishing rig for the 935 is to use a 12 guage brush wrapped with ScotchBrite along with Brownells Bore Polish and Kroil. Unlike the Hone, that will remove metal from the bore, the ScotchBrite will only POLISH the bore.

BE VERY CAREFUL if you use a HONE X3!

Title: Re: What gauge brush to get for 935?
Post by: jayslim on February 25, 2011, 09:24:47 AM

12gauge and wrap it with ScotchBrite pad

Title: Re: What gauge brush to get for 935?
Post by: drum817 on February 25, 2011, 09:45:13 AM

Quote from: Old Gobbler on February 25, 2011, 07:47:00 AM
Be careful with that tool , it works very fast, and make sure you do not run it over any gas ports it can "ring out " a barrel like that -its happened to people before .

X 3

Title: Re: What gauge brush to get for 935?
Post by: surehuntsalot on February 25, 2011, 08:00:40 PM

10ga

Title: Re: What gauge brush to get for 935?
Post by: joshua on February 26, 2011, 04:43:02 AM

Quote from: bbcoach on February 25, 2011, 08:11:09 AM
The SAFEST and least expensive polishing rig for the 935 is to use a 12 guage brush wrapped with ScotchBrite along with Brownells Bore Polish and Kroil. Unlike the Hone, that will remove metal from the bore, the ScotchBrite will only POLISH the bore.

BE VERY CAREFUL if you use a HONE X3!

:agreed:

Title: Re: What gauge brush to get for 935?
Post by: runngun on February 26, 2011, 11:16:43 PM

I have the flex hone from brownells. Mine is the Fine, be sure to get the hone oil with it. Keep it moving. Works like a champ.
Mine is the 12 and I have used it in Brownings (backbored).

Turkey hunting forum for turkey hunting tips

Turkey Guns & Shooting => Turkey Guns => Topic started by: JustinM on February 24, 2011, 11:25:31 PM