Turkey hunting forum for turkey hunting tips

Turkey Guns & Shooting => Turkey Guns => Topic started by: Britton40 on March 26, 2012, 12:57:04 PM

Title: Anybody tested federal 3.5" HW #7 out of a browning inv+ ?
Post by: Britton40 on March 26, 2012, 12:57:04 PM
Thinking about trying them.  Anybody done any testing?  If so, please post pics, choke, etc.

Thanks!
Title: Re: Anybody tested federal 3.5" HW #7 out of a browning inv+ ?
Post by: decoykrvr on March 27, 2012, 08:41:58 AM
I shot a bunch of the 31/2" Federal HW 7's and 6's out of a BPS Invector + and never got what I considered a hunting pattern.  I had contacted Federal and spoke w/ Rachael Poore, head of product dev. for the HW loads and followed her suggestions on non-ported, parallel chokes and tried tubes w/ i.d.s of between .655-.700.  I finally gave up and sold all my shells.  I've shot 3/1/2" Hevi-13, MagBlends. 6's and 7's w/ the BPS in both an IC .665 and .675 and get phenomenal patterns w/ all of them.  The smaller shot favors the .665 and the MagBlends the .675.
Title: Re: Anybody tested federal 3.5" HW #7 out of a browning inv+ ?
Post by: Britton40 on April 29, 2012, 11:38:41 AM
Ordered a Pure Gold tempest in 660. I'll post the results.
Title: Re: Anybody tested federal 3.5" HW #7 out of a browning inv+ ?
Post by: gatrkyhntr70 on April 29, 2012, 11:58:29 AM
Quote from: Britton40 on April 29, 2012, 11:38:41 AM
Ordered a Pure Gold tempest in 660. I'll post the results.

These new pgtempest chokes in .660 may be the ticket with the fed. hwt's. It seems obvious Federal has no plans on doing away with the flight control wad.
Title: Re: Anybody tested federal 3.5" HW #7 out of a browning inv+ ?
Post by: chipper on April 29, 2012, 07:42:43 PM
I'd like to try them out with my SX3 with a tru lock .665 after my season closes.
Title: Re: Anybody tested federal 3.5" HW #7 out of a browning inv+ ?
Post by: Britton40 on April 29, 2012, 10:19:01 PM
I would like to also try the Trulock. I contacted them in March and they did not have the Inv+ ready yet.
Title: Re: Anybody tested federal 3.5" HW #7 out of a browning inv+ ?
Post by: Lucky Clucker on April 30, 2012, 01:57:00 AM
They shoot excellent in mine, I have a super X2 3.5 with a Browning inv. + Jelly head .670 ,good even and dense pattern,close to 250 in a 10 in circle at 40 yards. My single shot in full choke puts around 116 in a 10 in circle at 40 yards with the 3in load of 7's, it has killed just as good as any load I have seen.
Title: Re: Anybody tested federal 3.5" HW #7 out of a browning inv+ ?
Post by: Britton40 on April 30, 2012, 10:31:31 PM
How long is your barrel?
Title: Re: Anybody tested federal 3.5" HW #7 out of a browning inv+ ?
Post by: 224tth on May 01, 2012, 09:11:32 AM
I have shot and seen those loads shot in two buddies guns.  We all use .665 nonported extended chokes.  We average just a bit over 200 in the 10" circle at 40 yards.  Two guns shoot the carlson choke and I shoot a cheap ext .665 choke.

They shoot great and have about a 16-18" usable pattern at 40 yards.

thanks
224tth