Turkey hunting forum for turkey hunting tips

Turkey Calls => Turkey Calls => Topic started by: Curtdawg88 on March 02, 2012, 11:13:15 PM

Title: Glass Call Mainenance
Post by: Curtdawg88 on March 02, 2012, 11:13:15 PM
What abrasive substance does everyone use to rough up their glass pot calls?  I have that Primos thing, I forget the name of it that has multiple surfaces to use.  What is everyone else's abrasive of choice?
Title: Re: Glass Call Mainenance
Post by: cahaba on March 02, 2012, 11:28:05 PM
100 to110 sandpaper or emory cloth.
Title: Re: Glass Call Mainenance
Post by: runngun on March 02, 2012, 11:39:22 PM
I use the primos slick stick diamond cutting surface and finish with fine sand paper.
Title: Re: Glass Call Mainenance
Post by: cannonball on March 02, 2012, 11:48:04 PM
Quote from: cahaba on March 02, 2012, 11:28:05 PM
100 to110 sandpaper or emory cloth.

Same here.
Title: Re: Glass Call Mainenance
Post by: Lunchbox on March 03, 2012, 01:13:44 AM
Quote from: cahaba on March 02, 2012, 11:28:05 PM
100 to110 sandpaper or emory cloth.

I'm only using 60 grit on mine, should i step it up? This is my first season using a glass call(got it new), so i'm pretty clueless.
Title: Re: Glass Call Mainenance
Post by: runngun on March 03, 2012, 01:26:10 AM
You can work it with 60 but need the finish with a fine or that's how I does it .
Title: Re: Glass Call Mainenance
Post by: Lunchbox on March 03, 2012, 01:32:53 AM
Quote from: runngun on March 03, 2012, 01:26:10 AM
You can work it with 60 but need the finish with a fine or that's how I does it .

Sweet, thanks for the heads up.
Title: Re: Glass Call Mainenance
Post by: Turkey Beard on March 03, 2012, 09:26:49 AM
Primos Slick Stick is a great product, has mesh, stone, scouring pad, and chalk all in one tool.  1Up Game Calls has a sanding stone that is an excellent grit for glass calls, does a super job!
Title: Re: Glass Call Mainenance
Post by: Cut*N*Run on March 03, 2012, 11:22:57 AM
I usually start with 110 and then go to a conditioning stone. Sometimes it's only one or the other- depends on what the call likes.

I get rid of all the glass dust. If the striker won't grip the cleaned surface I find a striker that will. Leaving the dust just makes the call start slipping for me.
Title: Re: Glass Call Mainenance
Post by: pappy on March 03, 2012, 12:02:29 PM
Let me let you in on a secret, go get you a diamond knife sharpener like the one on the site here I put inside this post, use the fine grade ...it will condition the glass in no time and save you a lot of rubbing with just common sandpaper.
http://www.knivesplus.com/DMT-Knife-Sharpener-DMT-W7EFC.HTML
Then if you feel the call is too raspy, follow it with some scotch brite....
Title: Re: Glass Call Mainenance
Post by: WildTigerTrout on March 03, 2012, 09:23:23 PM
Quote from: runngun on March 02, 2012, 11:39:22 PM
I use the primos slick stick diamond cutting surface and finish with fine sand paper.
+ 1
Title: Re: Glass Call Mainenance
Post by: Turkey Trot on March 04, 2012, 05:32:19 PM
Sheetrock mesh is a god start and you can use fine paper or scotchbrite behind it.

That's a new tip for me Pappy, I'll try that.
Title: Re: Glass Call Mainenance
Post by: misfire on March 04, 2012, 06:24:22 PM
I use 150 grit sandpaper. 60 is real aggressive
Title: Re: Glass Call Mainenance
Post by: cahaba on March 04, 2012, 09:18:25 PM
I spend alot of time tuning the call. Even the strikers act different and give a different sound according to what grit sandpaper one uses.