I have a 13.625" bandsaw that uses 93.5" blades. I don't make calls, but I do rip and resaw wood to make turning blanks. Most of the wood I cut is hard and dense (1.0 - 1.3 SG). What's a good blade type to use to cut blanks from dry logs of these hard, dense woods?
https://www.highlandwoodworking.com/woodslicer-resaw-bandsaw-blades.aspx
Not cheap, but these are the best I have found for hard, dry, clean wood. They are crazy sharp and don't tolerate junk, green wood, cutting aluminum, etc.
Quote from: Bill on May 29, 2025, 02:55:08 PMhttps://www.highlandwoodworking.com/woodslicer-resaw-bandsaw-blades.aspx
Not cheap, but these are the best I have found for hard, dry, clean wood. They are crazy sharp and don't tolerate junk, green wood, cutting aluminum, etc.
That does look like what I need! Thanks!
Sent from my iPhone using Tapatalk