any one shooting mossberg 500 fixed full choke 24 in barrel ,,, just wondering how good patterns getting out it Thanks
What shell Mike?
They do ok. I would try it to see how it does. Some the 410 show out then the rest need work on them. :anim_25:
Quote from: The Woodsman on January 23, 2018, 10:52:25 PM
What shell Mike?
Well went ahead ordered some of apex 9s ,,, see what happens lol
Quote from: SumToy on January 24, 2018, 08:52:26 AM
They do ok. I would try it to see how it does. Some the 410 show out then the rest need work on them. :anim_25:
yea ill see what it does ,,,, i know alot depends but whats a rough turn around time for u guys do work on barrel
We keeping the chokes cut for them. On barrels it has a lot to do with when it comes in. I say week on them just thread
SumToy,
What is the approximate cost on threading the Mossberg 500 .410 barrel and installing the choke? What kind of patterns are folks seeing after this is done? I don't hand load, so I would be shooting the Apex or Federal loads.
Thanks
115 to thread and choke it. Pattern I have not shot the apex or federal but they should do fine
Quote from: bez71 on February 10, 2018, 02:03:17 PM
SumToy,
What is the approximate cost on threading the Mossberg 500 .410 barrel and installing the choke? What kind of patterns are folks seeing after this is done? I don't hand load, so I would be shooting the Apex or Federal loads.
Thanks
Hey Mike this is my 410 cva Hunter with a sumtoy choke and apex#9 @ 37 yds Burris fast fire 11(https://uploads.tapatalk-cdn.com/20180220/9be4a5efd372c87f59e6d4a607cf4627.jpg)(https://uploads.tapatalk-cdn.com/20180220/ffedce2a8eaa434cb47c3392b645df57.jpg)
Sent from my VS985 4G using Tapatalk
That is the same gun I started my son out with. His first four birds didn't know what they were hit with, the 3 inch federal lead 6s gave the best pattern out to 30, have not ran any of the non lead loads through it. He has moved up to a 20g now and I carry the mossy on some hints when I am hunting public land doing a lot of walking.
well just sent one down range today just see how it shoot till i figure out what iam going to do with it open sight just beads
(http://i66.tinypic.com/2i6dzso.jpg)
Quote from: joeturkey on February 20, 2018, 08:04:43 AM
Quote from: bez71 on February 10, 2018, 02:03:17 PM
SumToy,
What is the approximate cost on threading the Mossberg 500 .410 barrel and installing the choke? What kind of patterns are folks seeing after this is done? I don't hand load, so I would be shooting the Apex or Federal loads.
Thanks
Hey Mike this is my 410 cva Hunter with a sumtoy choke and apex#9 @ 37 yds Burris fast fire 11(https://uploads.tapatalk-cdn.com/20180220/9be4a5efd372c87f59e6d4a607cf4627.jpg)(https://uploads.tapatalk-cdn.com/20180220/ffedce2a8eaa434cb47c3392b645df57.jpg)
Sent from my VS985 4G using Tapatalk
looks like a dead turkey their Joe :icon_thumright:
I bought a Mossberg 500 .410 recently. It only put about 60 pellets in a 10 inch circle at 40 yards. I sent the barrel to SumToy and had it threaded and a choke installed. The Federal #9 TSS load put 121 in a 10 inch circle at 40 yards with the SumToy choke. It is shooting low and left so I installed adjustable sights and need to sight it in next weekend.
I took my Mossberg 500 .410 back out to sight it in after installing the adjustable sights.
I had a four shot average of 131 pellets in a 10" circle at 40 yards with the Apex 9.5 shot loads. The highest pellet count for one shot with the Apex was 162 and the lowest was 90. Not sure what happened on the 90 pellet shot.
I had a three shot average of 150 pellets in a 10" circle using the Federal 9 shot loads. The highest pellet count with the Federal loads was 185 and the lowest was 132.
I didn't count pellets in a 20" circle but the Apex load is probably putting more in the 20" circle area.
This was at 40 yards measured with a laser rangefinder.
I feel confident using either load.
Quote from: joeturkey on February 20, 2018, 08:04:43 AM
Quote from: bez71 on February 10, 2018, 02:03:17 PM
SumToy,
What is the approximate cost on threading the Mossberg 500 .410 barrel and installing the choke? What kind of patterns are folks seeing after this is done? I don't hand load, so I would be shooting the Apex or Federal loads.
Thanks
Hey Mike this is my 410 cva Hunter with a sumtoy choke and apex#9 @ 37 yds Burris fast fire 11(https://uploads.tapatalk-cdn.com/20180220/9be4a5efd372c87f59e6d4a607cf4627.jpg)(https://uploads.tapatalk-cdn.com/20180220/ffedce2a8eaa434cb47c3392b645df57.jpg)
Sent from my VS985 4G using Tapatalk
Did that CVA come pre drilled and tapped? Or did you have Sumtoy do it?
Sent from my Pixel 2 using Tapatalk
Sum toy did all the work just send him the gun or just the barrel he will thread it for the choke and drill and tap for his mount for a Burris ff 2 or 3 I'm still fine tuning the gun my shot pattern with the sst apex load will be a lot better Williams at sum toy did a super job .