OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Rib Mount Picatinny Rail for 1/4” Rib?

Started by AppalachianHollers, April 19, 2020, 08:47:43 PM

Previous topic - Next topic

AppalachianHollers

Why do there seem to be none in this dimension?
I would love to pull my Vortex red dot off my AR for turkey season, but I need a rail that fits my Winchester SXP's rib.

Or has anyone successfully adapted a 3/8" mount to a 1/4" rib in some way?


Sent from my iPhone using Tapatalk

troutfisher13111

Have you looked at the Meadow Creek Mounts? There is a thread somewhere around here recently started about them.

Sent from my E6910 using Tapatalk


USMC0331

Meadow creek mounts

Sent from my SM-N950U using Tapatalk


AppalachianHollers

My only concern is my optic uses a cantilever ring mount, and I'm not sure the Meadow Creek are compatible. Can you put a picatinny strip on the meadow creek?


https://vortexoptics.com/red-dots/strikefire-ii-red-dot/vortex-strikefire-2-red-dot.html?vortex_reticle=1068


Sent from my iPhone using Tapatalk

USMC0331

I do not beleive so.

Sent from my SM-N950U using Tapatalk


AppalachianHollers

Afraid that won't work then. Need some way to get a picatinny/cantilever rail on the rib.


Sent from my iPhone using Tapatalk

USMC0331

Sorry.

Sent from my SM-N950U using Tapatalk


AppalachianHollers

I greatly appreciated the suggestion—if had the right kind of optic; it'd have been the winning ticket.

I'm just amazed that something so basic doesn't seem to exist in the wide market of aftermarket parts for this rid width.


Sent from my iPhone using Tapatalk

lowoctane

Years ago I drilled and tapped the rib on my 870 SM and mounted a small red dot right on the rib.
It's held up nicely for many years. :camohat:
I'm Old School...
GOD, GUTS AND GUNS
MADE AMERICA GREAT,
LET'S KEEP ALL THREE!
NRA Endowment
NAHC Life

AppalachianHollers

Quote from: lowoctane on April 28, 2020, 04:40:43 PM
Years ago I drilled and tapped the rib on my 870 SM and mounted a small red dot right on the rib.
It's held up nicely for many years. :camohat:
I am increasingly convinced the only solution for me is to have my receiver drilled and tapped. Will be worth knowing the system can hold up to recoil.


Sent from my iPhone using Tapatalk

WildSpur

Quote from: AppalachianHollers on April 28, 2020, 06:27:29 PM
Quote from: lowoctane on April 28, 2020, 04:40:43 PM
Years ago I drilled and tapped the rib on my 870 SM and mounted a small red dot right on the rib.
It's held up nicely for many years. :camohat:
I am increasingly convinced the only solution for me is to have my receiver drilled and tapped. Will be worth knowing the system can hold up to recoil.


Sent from my iPhone using Tapatalk
It can be done!

I just did this on my boys 870.  I found the 8-40 tap/bit and ran over to my father's to use his drill press.  I got it right the 1st time. Worse case you need to do it 2x and find flush screws to fill in the holes. 

Sent from my SM-G970U using Tapatalk



Cluck more, yelp less

gesthuntn

Is the SXP drilled and tapped? If so I would contact Sumtoy Customs and get one of his mounts.

AppalachianHollers

Quote from: gesthuntn on May 24, 2020, 08:27:49 PM
Is the SXP drilled and tapped? If so I would contact Sumtoy Customs and get one of his mounts.

Mine isn't, but I think on more recent models it comes standard. Haven't had mine drilled and tapped, yet, but will look into their mount system when I do.


Sent from my iPhone using Tapatalk

gesthuntn


AppalachianHollers

Quote from: gesthuntn on May 25, 2020, 07:01:36 AM
This would work to mount a small red dot to. I have not used one but looks solid. https://www.opticsplanet.com/aimtech-remington-rib-rider-tactical-rail.html
I think the rib dimensions on the 870 are different, though.
Another thing is that I already have a "large," tube-like red dot, and don't plan on getting another.


Sent from my iPhone using Tapatalk