Easy Mount for SBE2 and FF3

[alabamabowman]

I used the rear mount only to mount my FF3 on SBE2 and it worked perfect. I'm I missing something on the benefits of the marlin 336 base. I just wanted to use the pre drilled holes in my gun. Let me know if there are any major advantages to using the 336.




http://www.opticsplanet.com/warne-matte-base-set-for-benelli-black-eagle-super-black-eagle-54243.html?gclid=CLzF-6Hc3rsCFTJo7AodOkMApQ&ef_id=UoBMyQAABEWsogLi:20140102050713:s

[reynolds243]

The 336 base will be the lowest profile base

[the Ward]

That's a good setup you have.The 336 marlin is the lowest profile mount for the ff2/3, but you will have to either redrill the base or receiver for it to fit the benelli.If you go this route I recommend having the mount redrilled if possible,as the benelli receivers are extremely hard and difficult to drill and tap from what I've read.