OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

What color latex and thickness is your fav?

Started by vt35mag, April 11, 2016, 07:36:23 AM

Previous topic - Next topic

vt35mag

Recently added a tube call to the arsenal this year, and was curious what color and thickness latex other preferred on their tube call.  I have been playing around with multiple colors and thickness, but yellow .004 seems to be what I end up going back to.

pappy

I use .004" on all my tubes, some will say thicker latex runs easier and doesn't lose its tension, I really can't say because with my newest tube the GULP it has three orings on it, there is noway to have it slip once it is installed and if you want more raspiness then take off the top one or top two orings and it is there. I also was shown a trick to increase the raspiness on a single oring setup and that was to knick just to the inside of the inside diameter on the tube above the lip rest on either side...
my new email is paw.paw.jack@sbcglobal.net
tel...573-380-8206

mspaci


Candyman

I prefer .003 latex. I do carry a tube with tan theraband for louder calling while prospecting.