OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Scope Mount for 20 g Beretta 391??

Started by WAGinVA, February 07, 2016, 11:20:23 AM

Previous topic - Next topic

WAGinVA

Does anyone make a mount for a 20 g 391 that does not require drilling and tapping?  Ant help would be greatly appreciated,
Terry

turkey_slayer

There's the rib mounts. Don't know much about them nor if they fit your particular gun

https://www.arredondoaccessories.com/category.cfm?CID=1004,2008&PID=fe15k3941nzihn&GID=JDSM

Sent from my SM-N900V using Tapatalk


WAGinVA

Thanks Turkey Slayer, I realy am looking for a mount for a scope, I should have been more specific.  Ideally something like a saddle mount that I can put on and remove when I do not want the scope on the gun.

turkey_slayer

I can't tell if this suppose to attach to the rib or what. Description is a little vague.

Edit: it mounts to 2 notches in the receiver. Does your gun have those?

http://www.berettausa.com/en-us/beretta-scope-base-for-semiauto-shotguns-black/c61275/

Sent from my SM-N900V using Tapatalk

WAGinVA

Thanks again T-S, that mount only fits the 391 Xtrema which I believe are all 12 gauge guns.

WyoHunter

Quote from: turkey_slayer on February 07, 2016, 01:14:02 PM
There's the rib mounts. Don't know much about them nor if they fit your particular gun

https://www.arredondoaccessories.com/category.cfm?CID=1004,2008&PID=fe15k3941nzihn&GID=JDSM

Sent from my SM-N900V using Tapatalk


I did the rib mount and it wasn't satisfactory - impact changed and started to damage the rib. I had a gunsmith drill and tap mine and mount a picatinny rail that I got on ebay. Worked out great!
If I had a dollar for every gobbler I thought I fooled I'd be well off!

cbhunter

I too was looking for a scope mount for my Beretta 3901 but mine is a 12 Ga. Basically the same as a 391 but NOT 20 GA. Couldn't find anything so I called Beretta and they have a Burris Red Dot with a "built in" mount that fits between the forearm and the receiver. JUST ordered it today and the price was VERY much in line with very similar products. I would think it will fit your gun just limits you to that particular scope. Hope this helps!?