Print Page - What scope rail for Winchester SX3 20 Ga that isn't threaded??

Title: What scope rail for Winchester SX3 20 Ga that isn't threaded??
Post by: c cape on March 07, 2017, 11:27:15 AM

I have a Winchester Sx3 20 ga in bottomland that I would like to put a red dot on. It is not drilled and tapped from the factory but I have a local gunsmith that can. Has anyone done this and what base did you use?

Thanks,
Chris

Title: Re: What scope rail for Winchester SX3 20 Ga that isn't threaded??
Post by: mrclif on March 07, 2017, 01:50:18 PM

Used the burris 336 mount and Vortex venom sight had it drilled and tapped.

Title: Re: What scope rail for Winchester SX3 20 Ga that isn't threaded??
Post by: c cape on March 07, 2017, 02:31:47 PM

Thanks buddy. Thats exactly what I needed to know.

Title: What scope rail for Winchester SX3 20 Ga that isn't threaded??
Post by: JHoyle on March 07, 2017, 02:34:00 PM

Get one of Sumtoy's bases for the fast fire. Lowest cleanest looking mount there is. (https://uploads.tapatalk-cdn.com/20170307/2e463f7d5fc8857f254c5379b972fe9d.jpg)

Sent from my iPhone using Tapatalk

Title: What scope rail for Winchester SX3 20 Ga that isn't threaded??
Post by: mrclif on March 10, 2017, 03:55:49 PM

I'm sure the sumtoy is a fine mount but it's not lower(https://uploads.tapatalk-cdn.com/20170310/e46785878ee3d4cb69988dcefc4c0d05.jpg)

Sent from my SM-G900V using Tapatalk

Title: Re: What scope rail for Winchester SX3 20 Ga that isn't threaded??
Post by: Strutr on March 14, 2017, 09:38:26 AM

You're gonna like that reflex sight. I like the low profile and relatively open field of view.

Title: Re: What scope rail for Winchester SX3 20 Ga that isn't threaded??
Post by: Ohio hunter88 on March 18, 2017, 03:16:32 PM

Does any one know if they make a speed bead for the sx3 20ga ?

Title: Re: What scope rail for Winchester SX3 20 Ga that isn't threaded??
Post by: c cape on March 22, 2017, 12:46:20 PM

Ended up getting a sumtoy mount. Had to do some modifying but finally got it on there.

To answer the speedbead question they do make one for the 12 GA SX3 that can be modified to work. I couldn't find one in a limited amount of time though.

Title: Re: What scope rail for Winchester SX3 20 Ga that isn't threaded??
Post by: Ohio hunter88 on March 22, 2017, 04:34:26 PM

Alright thanks I going to go with the. Speed bead. For. My sx3 for. Next. Yr

Turkey hunting forum for turkey hunting tips

Turkey Guns & Shooting => Turkey Gun Sights & Optics => Topic started by: c cape on March 07, 2017, 11:27:15 AM