OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Franchi Affinity III trigger…

Started by sixbird, December 10, 2021, 02:00:54 PM

Previous topic - Next topic

sixbird

Friend bought a new 20 ga. Affinity III and, although it's a really nice gun, the trigger leaves a lot to be desired. Lots of travel and not smooth.
I called Taran Tactical about a spring kit and they said theirs wouldn't work.
Anybody know of another performance spring supplier?

USMC0331

You can try a MCarbo,  not sure if they make one for that shot gun but you can always call and ask.

Sent from my SM-N950U using Tapatalk


sixbird

Thanks for that...
Funny, I just remembered them and messaged them.
Came from that and saw your post.
Thanks again brutha'

USMC0331

For sure!

Sent from my SM-N950U using Tapatalk


sixbird

Contacted M Carbo and, unfortunately they don't have a spring kit for it...

sixbird

Does anybody know if Benelli M2 springs would be interchangeable?

Trkmaster88

In all of my Franchi's and Benelli's (same trigger group) I run the Taran reduced power trigger spring. That alone reduces the weight a lot, but if you want to take the creep out you'll have to have somebody take a little material off of the hammer where it contacts the sear. Polish both the hammer and sear and you'll have yourself an awesome feeling trigger. I don't use a reduced hammer spring because I want strong primer strikes.

sixbird

Well, thanks brutha'! I knew somebody on here would know...
I was pretty sure by looking at the trigger group that they would interchange but this gives me confidence that they do...
Thanks Trkmaster!