OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

What choke to use for federal 3rd degree?

Started by JMalin, April 29, 2019, 04:23:21 PM

Previous topic - Next topic

JMalin

I've decided I want something a little more forgiving at close ranges than the longbeards I've been shooting.  What constriction should I be looking for in both 12 and 20 gauge and keep a respectable pattern out to 40?  Thanks

drakehammer

Skeet is pretty forgiving.


Sent from my iPhone using Tapatalk

coonhunter

 It's been my experience, that it don't make much difference which you use for those shells. They throw a wide pattern no matter what!  I have never been able to get a decent 40 yr pattern with them. If I wanted a more forgiving pattern I would shoot the Winchester supremes or hevi 7 with like a .670 choke  or a little more open?
Joshua 24:15

SoDak_JD

My 12ga is a Benelli Nova.  I used a Carlson's flush-mount Extra-Full (.685) and it worked very well.  Two years ago it was from about 15 yards.  Last year, it was 42 yards...both good solid kills.  Those were using the old ones without TSS or the new Flex wad.  I've shot the new ones this year and they seemed to pattern the same.

My 20ga. is a Remington 870 with Carlson's Extended Turkey Choke in .575.  It's a new gun this year so haven't had it out in the field yet.  I thought it patterned to my expectations from 20 and 40 yards but didn't take any pictures.  This is the current 3rd Degree with TSS and flex wad.

paboxcall

Quote from: SoDak_JD on May 15, 2019, 03:15:20 PM
My 20ga. is a Remington 870 with Carlson's Extended Turkey Choke in .575.  It's a new gun this year so haven't had it out in the field yet.  I thought it patterned to my expectations from 20 and 40 yards but didn't take any pictures.  This is the current 3rd Degree with TSS and flex wad.

Tried the same 3rd degree 20 gauge load in my Mossberg 500, 22" barrel with the IC .555 and IC .562. I wasn't impressed with .562, but the .555 was a decent. No pics of the 3rd Degree, went to straight TSS 9s from there but I would hunt the .555 and 3rd Degree if I couldn't get TSS 9s.
A quality paddle caller will most run itself.  It just needs someone to carry it around the woods. Yoder409
Over time...they come to learn how little air a good yelper actually requires. ChesterCopperpot