Print Page - Fed. HW 3" #7's

Title: Fed. HW 3" #7's
Post by: Punisher on January 12, 2014, 07:23:33 PM

Remington 870: 26" barrel, Sumtoy 562-5, 55 degrees. Would you be satisfied?

Title: Re: Fed. HW 3" #7's
Post by: chatterbox on January 12, 2014, 07:26:02 PM

Very even pattern. I would hunt with that all day! :icon_thumright:

Title: Fed. HW 3" #7's
Post by: alloutdoors on January 12, 2014, 07:30:51 PM

That will kill one all day long. Was that the only shot you took at 40 or the best of several?

Title: Re: Fed. HW 3" #7's
Post by: Punisher on January 12, 2014, 08:24:46 PM

That is about the average.

Title: Re: Fed. HW 3" #7's
Post by: surehuntsalot on January 12, 2014, 10:01:36 PM

I would hunt with it

Title: Re: Fed. HW 3" #7's
Post by: owlhoot on January 12, 2014, 10:34:34 PM

looks like the dirtnap for old toms.

Title: Fed. HW 3" #7's
Post by: wbpc on January 12, 2014, 11:20:03 PM

I would be very pleased with that pattern.

Title: Re: Fed. HW 3" #7's
Post by: R AJ on January 13, 2014, 12:10:46 PM

That same pattern at 30 yards will definitely be lights out and you will be amazed at the evenness of the pattern with considerably higher numbers to boot. It will definitely work for a turkey gun.

Title: Re: Fed. HW 3" #7's
Post by: gophert on January 13, 2014, 05:31:59 PM

I wouldn't waste anymore money. Go hunt!

Title: Re: Fed. HW 3" #7's
Post by: Tom Foolery on January 13, 2014, 07:10:39 PM

Go forth and kill.......

Title: Re: Fed. HW 3" #7's
Post by: FL-Boss on January 13, 2014, 08:28:26 PM

Nice! polish up the barrel if you havent already.. .... 150+ is good.. and better than most 12ga with lead..

Title: Re: Fed. HW 3" #7's
Post by: savduck on January 14, 2014, 08:21:32 PM

Perfect pattern for a 20 gauge. There are 12s out there that struggle to shoot the same. I get that same type pattern and for me the last two seasons its been lights out. 13 longbeards and No flopping.

Title: Re: Fed. HW 3" #7's
Post by: Punisher on January 14, 2014, 08:29:01 PM

Thanks for the responses fellows. Now I just have to wait to put a gobbler's beak in the dirt. :fud:

Title: Re: Fed. HW 3" #7's
Post by: Eric Gregg on January 21, 2014, 10:02:04 PM

Quote from: Punisher on January 14, 2014, 08:29:01 PM
Thanks for the responses fellows. Now I just have to wait to put a gobbler's beak in the dirt. :fud:

Nice pattern! :newmascot:

Title: Fed. HW 3" #7's
Post by: goblr77 on January 26, 2014, 08:12:19 PM

Nothing wrong with that.

Sent from my iPad using Tapatalk HD

Title: Re: Fed. HW 3" #7's
Post by: Ridge Rooster on February 02, 2014, 06:47:43 PM

If I can get that kind of pattern with my new 20, I will be satisfied!

Ridge Rooster

Title: Re: Fed. HW 3" #7's
Post by: Gooserbat on February 07, 2014, 10:10:33 AM

That's better than I get with my 12 with lead #6. I'd go hunting.

Title: Re: Fed. HW 3" #7's
Post by: WyoHunter on February 15, 2014, 08:45:50 PM

Dead bird!

Title: Re: Fed. HW 3" #7's
Post by: Punisher on February 15, 2014, 10:06:08 PM

If a person wants to shoot these shells, they had better start stocking up on them now. They are getting hard to find. I just ordered some from Gander Mountain (as bad as I hated to because they were more expensive there). The good thing is that any order over fifty dollars is free shipping right now. After my order tonight, I will have 8 boxes in my stock pile. ;)

Title: Fed. HW 3" #7's
Post by: 01Foreman400 on March 01, 2014, 04:44:25 AM

Quote from: Punisher on February 15, 2014, 10:06:08 PM
If a person wants to shoot these shells, they had better start stocking up on them now. They are getting hard to find. I just ordered some from Gander Mountain (as bad as I hated to because they were more expensive there). The good thing is that any order over fifty dollars is free shipping right now. After my order tonight, I will have 8 boxes in my stock pile. ;)

And they aren't getting any cheaper either.

I'd hunt with that patterern.

Sent from my iPhone using Tapatalk

Turkey hunting forum for turkey hunting tips

Turkey Guns & Shooting => 20 Gauge Turkey Gun Pattern Pictures => Topic started by: Punisher on January 12, 2014, 07:23:33 PM