Are there certain woods that work best with certain pot call surfaces? I see a little bit of everything out there. Lots of zebrawood used for pots. How much of a difference does the wood make for sound?
Sent from my iPhone using Tapatalk
Harder/denser woods make better glass and aluminum calls, softer woods work best in a slate pot.
This isn't Bible, but is more a generalization.
I have some Poplar (a soft wood) glass calls from Brad Robert's that are as good as any, and some slate calls in various Rosewood (hard wood) pots from several makers that are top notch too.
Quote from: Meleagris gallopavo on August 07, 2021, 09:56:13 AM
Are there certain woods that work best with certain pot call surfaces? I see a little bit of everything out there. Lots of zebrawood used for pots. How much of a difference does the wood make for sound?
Sent from my iPhone using Tapatalk
Biggest thing ive noticed is that with softer woods your dimensions have to be good. With harder woods you can get by with looser dimensions and still get a good sounding call. Now that being said 2 blanks from the same board with same dimensions can have two totally different sounds.
Sent from my SM-G988U using Tapatalk
Quote from: Swamp on August 07, 2021, 01:38:26 PM
Quote from: Meleagris gallopavo on August 07, 2021, 09:56:13 AM
Are there certain woods that work best with certain pot call surfaces? I see a little bit of everything out there. Lots of zebrawood used for pots. How much of a difference does the wood make for sound?
Sent from my iPhone using Tapatalk
Biggest thing ive noticed is that with softer woods your dimensions have to be good. With harder woods you can get by with looser dimensions and still get a good sounding call. Now that being said 2 blanks from the same board with same dimensions can have two totally different sounds.
Sent from my SM-G988U using Tapatalk
Yep. Same with strikers out of the same piece of wood.
Sent from my iPhone using Tapatalk
Quote from: Meleagris gallopavo on August 07, 2021, 01:46:46 PM
Quote from: Swamp on August 07, 2021, 01:38:26 PM
Quote from: Meleagris gallopavo on August 07, 2021, 09:56:13 AM
Are there certain woods that work best with certain pot call surfaces? I see a little bit of everything out there. Lots of zebrawood used for pots. How much of a difference does the wood make for sound?
Sent from my iPhone using Tapatalk
Biggest thing ive noticed is that with softer woods your dimensions have to be good. With harder woods you can get by with looser dimensions and still get a good sounding call. Now that being said 2 blanks from the same board with same dimensions can have two totally different sounds.
Sent from my SM-G988U using Tapatalk
Yep. Same with strikers out of the same piece of wood.
Sent from my iPhone using Tapatalk
I'm working on a paduk slate call right now and it's really messing with me. I can't seem to get any rasp out of it I just took the surfaces out and made some changes so we will see once it gets glued up.
Sent from my SM-G988U using Tapatalk
Like others have said in general the harder the wood the higher the pitch, tone and sound this will vary with didn't type call surfaces. Softer woods will usually carry less tone, but all the dimensions of the internals of the call and builder play a major part as well. You will find a lot of different answers to this question. IMO
Softer wood absorbs the metric in the inside
Except , to my ears the only playing service is copper , I think copper is very different
,
Quote from: Greg Massey on August 08, 2021, 09:53:39 AM
Like others have said in general the harder the wood the higher the pitch, tone and sound this will vary with didn't type call surfaces. Softer woods will usually carry less tone, but all the dimensions of the internals of the call and builder play a major part as well. You will find a lot of different answers to this question. IMO
Yeah. You answered my question. I'm just wanting a general answer.
Sent from my iPhone using Tapatalk
Quote from: Meleagris gallopavo on August 08, 2021, 10:27:22 AM
Quote from: Greg Massey on August 08, 2021, 09:53:39 AM
Like others have said in general the harder the wood the higher the pitch, tone and sound this will vary with didn't type call surfaces. Softer woods will usually carry less tone, but all the dimensions of the internals of the call and builder play a major part as well. You will find a lot of different answers to this question. IMO
Yeah. You answered my question. I'm just wanting a general answer.
I don't care for dense woods unless you just want that loud call. . I prefer a grainy lighter density wood like mulberry, sassafras, some exotics like padauk and zebrawood some spalted woods, cherry and walnuts of all variety's are great. if the pot is too heavy to me it ruins the overall playability unless you just want a loud horsepower call which I just don't like 90% if the time. I have almost quit buying exotics for pot calls. Too many good less costly American woods.
Sent from my iPhone using Tapatalk
McClain, thats a really good, specific and interesting answer to this question. I tend to like the pots I have with the lighter, less dense woods too but I never really realized why; you brought up some interesting points.
:welcomeOG:
Quote from: Zobo on August 09, 2021, 11:15:29 PM
McClain, thats a really good, specific and interesting answer to this question. I tend to like the pots I have with the lighter, less dense woods too but I never really realized why; you brought up some interesting points.
the thought that harder and denser wood is better is a path taken and hopefully learned from. Eventually you get to the point on density that regular wood strikers won't play on them very well softly. If you got to reach for laminate strikers with excess pressure to get a decent sound it not really a very good call. Turns out that too much density left in the pot and it's not a very playable call. Softer adhesives help counteract density to a point. You can take as much wood out of the pot as possible but then you start running into thin pot wall problems and sound goes dead or cups/warps.
Here are two calls in my collection can't really tell what woods where used the 3rd ADAMS call from 1977 looks like soft wood maybe maple the stowe call from 1976 looks like hard wood but as you can see no sound chamber other than you're hand
Quote from: joeturkey on August 19, 2021, 07:40:28 AM
Here are two calls in my collection can't really tell what woods where used the 3rd ADAMS call from 1977 looks like soft wood maybe maple the stowe call from 1976 looks like hard wood but as you can see no sound chamber other than you're hand
Two fine looking calls. Never seen one like that from DD. Learn something new every day.