OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Rem 870-IC .665-Fed 3” #7 TSS

Started by strut_stopper, April 22, 2018, 09:18:32 PM

Previous topic - Next topic

strut_stopper

Howdy all, new member and first post here. Just want to say thanks to everyone for the loads of info and advice on here! It truly helps tons! This is my first time shooting tss, and the best pattern of all the loads I tested this year. 235 in the 10" at 40. It was in the mid to upper 50's with a little wind. It will not let me post a pic off my phone, it doesn't like the file type? I'll try to get one up soon

Next up, looking for info/advice on the Winchester sxp turkey guns? How they pattern, shells or chokes they like..? I like my 870, but  in recent years my love for the 870 has dwindled due to Remington's QC issues. it's taken a lot to get to that 235 pattern, it used to not even eject shells because the chamber was cut so rough.and a lot of barrel polishing too.  Being a machinist, it would have never left the door looking like that.

Again, thanks for all the info on here. Y'all have been a big help.

strut_stopper


strut_stopper

Still looking for any info or advice anyone may have on the sxp turkey guns. Thanks!

BrowningGuy88

Well you probably need to start a new thread about the Winchester.

I will say they are good guns. The invector plus guns nearly always pattern well. I like Winchester/Browning products a lot.