OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

TSS anyone ??

Started by Fullfan, February 17, 2018, 08:29:36 AM

Previous topic - Next topic

jryser

Quote from: Fullfan on May 23, 2018, 08:42:49 PM
Crimps look great what are you using
https://www.precisionreloading.com/cart.php#!l=MM&i=RC16

The secret is the WD40


Sent from my iPhone using Tapatalk

Captain Hooks

Just take one of those little pellets to kill.
Those 9's for a 20 gauge are lights out. Destroyed 3 under 25 yards and did a reaction kill and ended up to be 55 steps.

Fullfan

Quote from: jryser on May 23, 2018, 09:15:16 PM
Quote from: Fullfan on May 23, 2018, 08:42:49 PM
Crimps look great what are you using
https://www.precisionreloading.com/cart.php#!l=MM&i=RC16

The secret is the WD4

Ten 4 how uch WD and do you put in on the hulls or the crimper ?
Don't gobble at me...

jryser

Quote from: Fullfan on May 24, 2018, 07:36:50 PM
Quote from: jryser on May 23, 2018, 09:15:16 PM
Quote from: Fullfan on May 23, 2018, 08:42:49 PM
Crimps look great what are you using
https://www.precisionreloading.com/cart.php#!l=MM&i=RC16

The secret is the WD4

Ten 4 how uch WD and do you put in on the hulls or the crimper ?
I spray a scosh of WD40 on a q-tip. If you accidentally saturate it, shake it off real good. Then I just run that Q-tip around the outside quarter inch of the hull.  Just a light coat. Start the crimp slow and check often!


Sent from my iPhone using Tapatalk

Fullfan

Ten 4, some on mine look great others look like crapola.  But they still work very well..
Don't gobble at me...

jryser

Quote from: Fullfan on May 25, 2018, 08:07:52 AM
Ten 4, some on mine look great others look like crapola.  But they still work very well..
Once I found the right trim length it changed to "perfection" - I use BPI trim doctor for the hull trimming. Let me know if u have better results!!


Sent from my iPhone using Tapatalk

Fullfan

Don't gobble at me...