OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

What am I doing wrong? Bad patterns

Started by sasquatch1, January 09, 2018, 04:06:17 PM

Previous topic - Next topic

Swampchickin234

Id try a sumtoy .562 or a Remington super full


Sent from my iPhone using Tapatalk

Swampchickin234

They shot awfully well for us. 


Sent from my iPhone using Tapatalk

Spurs Up

FWIW I get inconsistent patterns shooting 1-5/8 oz of #9 TSS thru an IC 555 in my 870 compact. Different recipe than yours and no chewed up wads. But I'll get a dense core (350-ish) one shot and 250 the next. Total in the 20" is a little less variable but inconsistent all the same. Much more consistent results (10"=260/10-20"=240) for me using a RSF. The RSF goes to the woods with me when using that shot size and weight.

Fullfan

That chewed up wad is not right, I have recovered several of mine and they sure do not look like that.

Where you located at ??
Don't gobble at me...

sasquatch1

Quote from: Fullfan on January 11, 2018, 06:17:28 PM
That chewed up wad is not right, I have recovered several of mine and they sure do not look like that.

Where you located at ??


South Louisiana, New Orleans area


Sent from my iPhone using Tapatalk

Hevishot 13

Youve got something messed up, I shoot that same load and get around 300 in the ten inch at 40, with around 200 in the 20 inch. You have to be consistent and precise in loading these. Go exactly by Hal's direction and dont deviate from it 

sasquatch1

#36
Quote from: Hevishot 13 on January 11, 2018, 10:28:13 PM
Youve got something messed up, I shoot that same load and get around 300 in the ten inch at 40, with around 200 in the 20 inch. You have to be consistent and precise in loading these. Go exactly by Hal's direction and dont deviate from it


Trying, ordered a box of apex ammo, once I shoot them I'll know if it's gun or load maybe


Sent from my iPhone using Tapatalk

davisd9

Quote from: sasquatch1 on January 11, 2018, 11:34:31 PM
Quote from: Hevishot 13 on January 11, 2018, 10:28:13 PM
Youve got something messed up, I shoot that same load and get around 300 in the ten inch at 40, with around 200 in the 20 inch. You have to be consistent and precise in loading these. Go exactly by Hal's direction and dont deviate from it


Trying, ordered a box of apex ammo, once I shoot them I'll know if it's gun or load maybe


Sent from my iPhone using Tapatalk

Possibly but they could be using a different wad. That is a variation of the BIG 20XL with the VP92 wad, which I shoot. Hal changed the load cause the VP92 was not being carried by BP. Someone elsewhere did a big order and got more wads for people. My friend USMC0331 is shooting that load with that wad and I think he is doing a bit more in the 10" with a BPS with 26" barrel. Not sure which choke.


Sent from my iPhone using Tapatalk
"A turkey hen speaks when she needs to speak, and says what she needs to say, when she needs to say it. So every word a turkey speaks is for a reason." - Rev Zach Farmer

sasquatch1

Quote from: davisd9 on January 12, 2018, 06:29:58 AM
Quote from: sasquatch1 on January 11, 2018, 11:34:31 PM
Quote from: Hevishot 13 on January 11, 2018, 10:28:13 PM
Youve got something messed up, I shoot that same load and get around 300 in the ten inch at 40, with around 200 in the 20 inch. You have to be consistent and precise in loading these. Go exactly by Hal's direction and dont deviate from it


Trying, ordered a box of apex ammo, once I shoot them I'll know if it's gun or load maybe


Sent from my iPhone using Tapatalk

Possibly but they could be using a different wad. That is a variation of the BIG 20XL with the VP92 wad, which I shoot. Hal changed the load cause the VP92 was not being carried by BP. Someone elsewhere did a big order and got more wads for people. My friend USMC0331 is shooting that load with that wad and I think he is doing a bit more in the 10" with a BPS with 26" barrel. Not sure which choke.


Sent from my iPhone using Tapatalk


I'm loading it with the CSD wad, which was in the load data when I got it.


Sent from my iPhone using Tapatalk

sasquatch1

Think I may have found a cause. I'm using an antique roll hand crimper, which I assume from its age was for 2 3/4 shells and by loading 3" shells into it, it kinda is putting pressure on the shell at and angle at first and slightly bending the shell in a sense. I guess I haven't noticed or this one did it worst to where it was more noticeable, idk, will do the next with a drill press and see.

Maybe this pic will show what I'm talking about
Will load some more and try and shoot next week again when it warms up a bit


Sent from my iPhone using Tapatalk

Rapscallion Vermilion

I use an antique roll crimper as well and they work great. The shell length shouldn't matter.  It doesn't take much pressure to get a good crimp. You should be compacting the load in the hull before putting it in the crimper.  You might be pushing it too hard in the crimper or it is out of alignment.

sasquatch1

Quote from: Rapscallion Vermilion on January 12, 2018, 05:40:21 PM
I use an antique roll crimper as well and they work great. The shell length shouldn't matter.  It doesn't take much pressure to get a good crimp. You should be compacting the load in the hull before putting it in the crimper.  You might be pushing it too hard in the crimper or it is out of alignment.


I'm def applying a good bit of pressure but it seems I need too? The load is compact before I crimp but unless I just dnt know how long I have to turn it, it's not crimping down tight unless I push hard? Maybe I'm trying to crimp too much hull but I only have 3/8 above the wad


Sent from my iPhone using Tapatalk

sasquatch1

This is how it's pushing sideways. By shell being to long the lever touches the edge of the shell at first and when applying pressure it pushes to the side slightly




Sent from my iPhone using Tapatalk

Hevishot 13

Quote from: davisd9 on January 12, 2018, 06:29:58 AM
Quote from: sasquatch1 on January 11, 2018, 11:34:31 PM
Quote from: Hevishot 13 on January 11, 2018, 10:28:13 PM
Youve got something messed up, I shoot that same load and get around 300 in the ten inch at 40, with around 200 in the 20 inch. You have to be consistent and precise in loading these. Go exactly by Hal's direction and dont deviate from it


Trying, ordered a box of apex ammo, once I shoot them I'll know if it's gun or load maybe


Sent from my iPhone using Tapatalk

Possibly but they could be using a different wad. That is a variation of the BIG 20XL with the VP92 wad, which I shoot. Hal changed the load cause the VP92 was not being carried by BP. Someone elsewhere did a big order and got more wads for people. My friend USMC0331 is shooting that load with that wad and I think he is doing a bit more in the 10" with a BPS with 26" barrel. Not sure which choke.


Sent from my iPhone using Tapatalk
I'm shooting both wads in the big 20xl. the vp92 wad and the csd, my gun patterned better with the csd wad. I got in on that big bulk order and I currently have 500 each of both the csd wad and the vp92. the csd patterned better with less flyers. I hope this helps someone

Rapscallion Vermilion

I trim my hulls so that I have 1/4" above the overshot card before crimping.  Your roll crimps do look just a bit deep to me, especially the first one you posted.