OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Weird LB Results

Started by HFultzjr, April 28, 2017, 08:57:59 AM

Previous topic - Next topic

HFultzjr

Went out to pattern my gun yesterday and had the following happen.
Wanted to test some LB #5 and #6.
My usual Federal #6 worked as needed. Good to 40 yards.
LB #5 Very tight up close (10 yards), slightly bigger than softball at 20 yards, volleyball at 30 yards and very good at 40 yards.

Now the problem was with the LB #6 which I was expecting to be the best of the bunch.
10 yards very tight one hole as with the #5.
20 yards only 8 pellets hit the target........nothing showing on the backer. Couldn't find the wad or anything.
Went straight to 40 yards and only had a stray couple pellets.
Now the weird thing is, I can't find where these are hitting. Not even on the backer, which is about 3 feet by 3 feet. I can't find wads, nothing. It is almost as if they are not loaded. Saturday is opening day for me, so I'll be sticking with my reg. Federal or #5 LB. Need to do more testing and going to open one up and see what I find. Will do at a later date and report back. Anyone hearing of such a problem?

Mossberg 500
12 gauge 3"
Undertaker choke
18" barrell

Very strange, I'll need to explore further.

:newmascot:

coonhunter

Are you using a scope or red dot?  Maybe you POI has moved or scope was knocked off??  I's normal to see POI shift but not 3 feet or better!! 
Joshua 24:15

HFultzjr

Dead Ringer Beard Buster pen sights.
All other shots were within an inch or 2.
Shot and tried many other loads in the past years and never more than a couple inches.
Anxious to cut  one open.

coonhunter

Got me!  I would cut one open as well....  May need to cut a #6 and #5 to compare?
Joshua 24:15

Ihuntoldschool

Oh I am sure they are loaded, just not going where they are supposed to.  Be interesting to see what happens if you try a bigger backer

Buford

Sounds to me like resin is not braking up when the trigger is pulled and choke isn't helping by braking the resin also. Some have brought this up in OG. Allabout shooting suggest using a tighter choke. I would try a tighter choke. It could also make the pattern more open not tighter. Hope you can figure it out and tell us what you find.    Buford

Buford

Try a different brand shell and see if it patterns better. If it does you know the trouble is the shell.   Buford

HFultzjr

Quote from: Buford on April 29, 2017, 09:47:01 PM
Try a different brand shell and see if it patterns better. If it does you know the trouble is the shell.   Buford

All other shells, including LB #5, work as expected. Just this box of #6 with this issue. I'll cut one open and take a look inside and do further testing. Just not right now, season started yesterday. Don't want to mess with my gun right now.

HFultzjr

Quote from: Buford on April 29, 2017, 09:42:18 PM
Sounds to me like resin is not braking up when the trigger is pulled and choke isn't helping by braking the resin also. Some have brought this up in OG. Allabout shooting suggest using a tighter choke. I would try a tighter choke. It could also make the pattern more open not tighter. Hope you can figure it out and tell us what you find.    Buford

That's along the lines of my thing, but why are the #5 fine and the #6 have issues?

owlhoot

Different resin in the loads, Clark has pointed this out in the past.

coonhunter

Just shot a few #6 today. Shot real good. 3" #6 at 40 yards had 212 in the 10". Sold me on switching from 3 1/2 back to 3".
Joshua 24:15

HFultzjr

Quote from: owlhoot on April 30, 2017, 09:19:38 AM
Different resin in the loads, Clark has pointed this out in the past.

That sounds like a possibility.