OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Turning square size

Started by turkey stew, March 04, 2021, 03:36:20 PM

Previous topic - Next topic

mmclain

I don't mind a bit starting at 1.25. Minimal waste. Starting at 1.5" is a waste of time and material for me .   Some calls I build I can start out at 7/8

turkey stew

Quote from: mmclain on March 09, 2021, 12:15:03 AM
I don't mind a bit starting at 1.25. Minimal waste. Starting at 1.5" is a waste of time and material for me .   Some calls I build I can start out at 7/8
Thank you for you answer. It is nice to hear that you guys turn other size wood squares!

Crawdad

I can do fine with 1.1/4" to much waste  using anything bigger,  I've personally haven't had any trouble!

turkey stew

Quote from: Crawdad on March 19, 2021, 08:44:06 PM
I can do fine with 1.1/4" to much waste  using anything bigger,  I've personally haven't had any trouble!
Thank you for your response. Nice to know that horn makers will use smaller size squares.