OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Rem 870 Trigger Fix

Started by Poppahunts, March 02, 2021, 10:29:48 PM

Previous topic - Next topic

Poppahunts

Evening fellas...
Wondering if anyone has any advice or experience on drop in trigger assembly's or spring changes for my 870 20 ga. Mine's got lots of creep and of course very heavy.
I have almost missed a few birds due to it.
Any advice appreciated.
Thanks in advance.
Turkeys For Tomorrow Member
Life NRA Member
Psalm 91
Life is hard, twice as hard if your stupid
               - John Wayne

Gmed

I bought the Timney kit. Has a new sear and three different trigger springs for pull weight. Shop around...they really work...
https://timneytriggers.com/remington-870-trigger-fix/

jordanz7935

Ive got patriot sear springs in my 870's. They definately made a difference in pull weight. Seems like a lot of guys love the timney kit for 870s. I would love to try the timney kit and see how it is compared to just the sear spring. That said i just dont see spending $100 on the timney kit, seems like your paying $50 for the parts $50 for the name.

Poppahunts

Quote from: Gmed on March 02, 2021, 10:41:38 PM
I bought the Timney kit. Has a new sear and three different trigger springs for pull weight. Shop around...they really work...
https://timneytriggers.com/remington-870-trigger-fix/

Thanks...
Did you have any creep ? If so did this help the issue?
Turkeys For Tomorrow Member
Life NRA Member
Psalm 91
Life is hard, twice as hard if your stupid
               - John Wayne

Gmed

Still a slight bit of "spongy, mush" but much lighter than it was and much better control, and I didn't even use the lightest spring. You might get by with just a set of springs from Mcarbo. I am not sure the sear is necessary to change to get acceptable results...

Westernmassman

Also went the Timney route and it made a huge difference. Used the middle weight spring. Highly recommend!

Poppahunts

Quote from: Westernmassman on March 04, 2021, 07:53:50 PM
Also went the Timney route and it made a huge difference. Used the middle weight spring. Highly recommend!

Many thanks fellas
I decided to go the Timney route
Got two sets on order today
Thanks again and good hunting
Turkeys For Tomorrow Member
Life NRA Member
Psalm 91
Life is hard, twice as hard if your stupid
               - John Wayne

cjr1

I have a Timney on mine, but a friend went with the kit from MCarbo. Much cheaper. It's not as smooth as mine, but for the price difference it's pretty dan good.

tracker#1

I lightened mine up with a Macarbo spring... $20, easy install

Poppahunts

Thanks fellas waiting on kits now
Turkeys For Tomorrow Member
Life NRA Member
Psalm 91
Life is hard, twice as hard if your stupid
               - John Wayne

Andy S.

Quote from: tracker#1 on March 05, 2021, 01:14:06 PM
I lightened mine up with a Macarbo spring... $20, easy install
Same here. Installed aftermarket spring, dry fire 100-150 times with Snap Caps and now it breaks clean at 3.25# with basically no creep on front end. I have done this on all three 870s I own, with springs from Remington, MCarbo and CCSkeet. CCskeet is cheapest at link below.

http://springs.ccskeet.com/
Andy S.

If I had saved all the money I spent on hunting, I'd spend it on hunting.