OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: Lathe for Stikers  (Read 2482 times)

Offline Josh_Alloy_Calls

  • Sr. Member
  • **
  • Posts: 117
Lathe for Stikers
« on: August 12, 2020, 11:00:51 AM »
What lathe do you guys think is the best for turning strikers?
I am aware that this is a lot to do with personal preference, but I am just looking for some models I can research myself.

I am wanting to get into the world of 1 piece strikers, so I will see what happens.
Thanks in advance guys!!

Josh

Offline BigSlam51

  • The Boss Gobbler
  • ****
  • Posts: 826
Re: Lathe for Stikers
« Reply #1 on: August 12, 2020, 12:47:05 PM »
Jet 1221vs

Sent from my SM-N975U using Tapatalk


Online doublespurs21

  • Paintbrush Beard
  • *****
  • Posts: 3541
Re: Lathe for Stikers
« Reply #2 on: August 14, 2020, 07:30:54 PM »
i use a Nova comet 2,,, works for me,,,,,,,,,,,,,,,

Offline M,Yingling

  • 2024 SITE SUPPORTER
  • Long Spur Gobbler
  • ********
  • Posts: 5347
  • In The Hills, PA
Re: Lathe for Stikers
« Reply #3 on: August 16, 2020, 08:04:34 AM »
if it was for strikers nothing else craftsman or harbor freight always see then local craigslist
 40 50 bucks
Not taking orders for calls at this time ,,,but my have some on hand  ,,,I Dont sell strikers
I do like copper pot calls,,,,Get them While u can
My YouTube
 https://www.youtube.com/user/CallerTurkey

Offline Josh_Alloy_Calls

  • Sr. Member
  • **
  • Posts: 117
Re: Lathe for Stikers
« Reply #4 on: August 16, 2020, 11:23:31 PM »
I appreciate ya’ll’s replies.
Y’all have got the research jump started.
I’m sure I will have some further questions moving forward.

Offline buckmark13

  • Full Member
  • *
  • Posts: 77
Re: Lathe for Stikers
« Reply #5 on: August 16, 2020, 11:37:55 PM »
Be careful getting a lathe
....that's just the beginning of going down  a slippery slope of expenses.

Lots of fun, but you will quickly find yourself wanting to do more.

I would agree with the previous post of finding one on Craigslist if you're truly interested in just strikers.

Offline BigSlam51

  • The Boss Gobbler
  • ****
  • Posts: 826
Re: Lathe for Stikers
« Reply #6 on: August 16, 2020, 11:58:22 PM »
Be careful getting a lathe
....that's just the beginning of going down  a slippery slope of expenses.

Lots of fun, but you will quickly find yourself wanting to do more.

I would agree with the previous post of finding one on Craigslist if you're truly interested in just strikers.
I agree its just the beginning of a slippery slope of expenses, so why not get a top notch lathe with a great warranty and be done with it?

Sent from my SM-N975U using Tapatalk


Offline mmclain

  • Hero Member
  • ***
  • Posts: 444
Re: Lathe for Stikers
« Reply #7 on: August 17, 2020, 11:52:24 PM »
 Vicmarc lathes.   It will last a lifetime. 

Offline buckmark13

  • Full Member
  • *
  • Posts: 77
Re: Lathe for Stikers
« Reply #8 on: August 18, 2020, 11:40:22 AM »
Be careful getting a lathe
....that's just the beginning of going down  a slippery slope of expenses.

Lots of fun, but you will quickly find yourself wanting to do more.

I would agree with the previous post of finding one on Craigslist if you're truly interested in just strikers.
I agree its just the beginning of a slippery slope of expenses, so why not get a top notch lathe with a great warranty and be done with it?

Sent from my SM-N975U using Tapatalk
Because spending the cash on a OneWay, Robust, Powermatic, etc. to make some strikers and see if you enjoy it seems to be overkill. At least to me. Why not buy a nice, used one and try it out. Find out if you enjoy it. See what else you might want to make in the future. Get in for very little investment,  then upgrade if / when you want to. You'll be able to sell that used lathe for what you probably paid for it, and get a lot of experience and insight along the way before going all in on something you may later realize that you don't need, want, or enjoy.

My two cents though,  but as always it's worth about two cents!

Offline BigSlam51

  • The Boss Gobbler
  • ****
  • Posts: 826
Re: Lathe for Stikers
« Reply #9 on: August 18, 2020, 12:24:03 PM »
Be careful getting a lathe
....that's just the beginning of going down  a slippery slope of expenses.

Lots of fun, but you will quickly find yourself wanting to do more.

I would agree with the previous post of finding one on Craigslist if you're truly interested in just strikers.
I agree its just the beginning of a slippery slope of expenses, so why not get a top notch lathe with a great warranty and be done with it?

Sent from my SM-N975U using Tapatalk
Because spending the cash on a OneWay, Robust, Powermatic, etc. to make some strikers and see if you enjoy it seems to be overkill. At least to me. Why not buy a nice, used one and try it out. Find out if you enjoy it. See what else you might want to make in the future. Get in for very little investment,  then upgrade if / when you want to. You'll be able to sell that used lathe for what you probably paid for it, and get a lot of experience and insight along the way before going all in on something you may later realize that you don't need, want, or enjoy.

My two cents though,  but as always it's worth about two cents!
I started with an old craftsman lathe, moved to a jet. I just figured since to OP already makes calls, he'd probably like it...

Sent from my SM-N975U using Tapatalk