OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: Winchester SX3 w/26 inch barrel and Carlson 575 Choke  (Read 3475 times)

Offline Yelper

  • Longbeard
  • ****
  • Posts: 1259
Winchester SX3 w/26 inch barrel and Carlson 575 Choke
« on: May 29, 2020, 11:45:53 AM »
Shot my SX3 20 ga this morning with ninja TSS 8.5 Shot. Temp was 68 and kinda humid.
Barrel length is 26 inch.
Sight-Burris FF3
Carlson 575 choke. 
Shots are 20yds, 30yds, 40yds and 50yd shots.

Note: I did change POA after 20 yd shot because it was a tad high.





« Last Edit: July 07, 2020, 10:08:09 AM by Yelper »

Offline MattinIdaho

  • Hero Member
  • ***
  • Posts: 343
Re: Winchester SX3 w/26 inch barrel and Carlson 575 Choke
« Reply #1 on: May 29, 2020, 01:35:57 PM »
Impressive!!! :you_rock:

Offline Yelper

  • Longbeard
  • ****
  • Posts: 1259
Re: Winchester SX3 w/26 inch barrel and Carlson 575 Choke
« Reply #2 on: May 29, 2020, 02:39:41 PM »
Look forward to using the 20 ga. Will be my first year hunting turkey with it.

Offline Old Timer

  • The Boss Gobbler
  • ****
  • Posts: 928
Re: Winchester SX3 w/26 inch barrel and Carlson 575 Choke
« Reply #3 on: May 30, 2020, 08:54:32 AM »
i`m liking it!

Offline Greenhead12

  • Full Member
  • *
  • Posts: 43
Re: Winchester SX3 w/26 inch barrel and Carlson 575 Choke
« Reply #4 on: May 31, 2020, 08:59:50 AM »
Nice shooting! I'm shooting the Carlsons 568 in my Winchester sx-3 20 ga with tss 9 shot. Patterns are very similar to yours. These 20 ga are fun to shoot, took 3 birds with mine this year all bang flop from 30 to 40 yards.

Offline bigbird

  • Longbeard
  • ****
  • Posts: 1289
Re: Winchester SX3 w/26 inch barrel and Carlson 575 Choke
« Reply #5 on: June 15, 2020, 04:32:34 AM »
How did ya mount the FF3 on your SX3? I have one and been thinking about putting one on it but I don’t know if I wanna get it drilled and tapped. Is there another way?

Offline Yelper

  • Longbeard
  • ****
  • Posts: 1259
Re: Winchester SX3 w/26 inch barrel and Carlson 575 Choke
« Reply #6 on: June 15, 2020, 08:53:47 PM »
How did ya mount the FF3 on your SX3? I have one and been thinking about putting one on it but I don’t know if I wanna get it drilled and tapped. Is there another way?

That model is the universal hunter and it was drilled at the factory. I had a sx3 12ga not drilled and sent just the receiver to sumtoy and they drilled it and put his base on it for the ff3. Best way to mount one in my opinion.

Offline bigbird

  • Longbeard
  • ****
  • Posts: 1289
Re: Winchester SX3 w/26 inch barrel and Carlson 575 Choke
« Reply #7 on: June 16, 2020, 11:28:04 AM »
I see. Mine isn’t drilled and tapped is why I was asking. How high is the sight up off the receiver?

Offline Yelper

  • Longbeard
  • ****
  • Posts: 1259
Re: Winchester SX3 w/26 inch barrel and Carlson 575 Choke
« Reply #8 on: June 16, 2020, 12:12:30 PM »
I see. Mine isn’t drilled and tapped is why I was asking. How high is the sight up off the receiver?


Offline bigbird

  • Longbeard
  • ****
  • Posts: 1289
Re: Winchester SX3 w/26 inch barrel and Carlson 575 Choke
« Reply #9 on: June 16, 2020, 01:40:18 PM »
That’s sweet

Offline Old Timer

  • The Boss Gobbler
  • ****
  • Posts: 928
Re: Winchester SX3 w/26 inch barrel and Carlson 575 Choke
« Reply #10 on: June 16, 2020, 09:35:49 PM »
Impressive! your gonna convert me yet :you_rock: