Winchester sx3 20 ga choke question

[Yelper]

I just got a new sx3 20 ga with a 26 inch barrel. Anyone running either a Pure Gold 570, Indian creek 570 or a sumtoy 570 choke in you 20 ga  and what are your results using TSS? I just got the sx3 20 ga  and I currently am using  a sx3 12ga with the pure gold 670 with great results. Any inputs on those chokes would be appreciated and any pattern pics would be good also.

Thanks

[bigbird]

I'm using an Indian creek 555 I have the same gun you got. I have a pair of jebs 560/565's and a sumtoy 562. With tss apex 9's shot best with the IC tube @40. But in reality if I didn't have so many tubes to try any of them I have with my gun is good enough. All I shoot at is the big turkey pic targets. I can't give you real accurate numbers but the 7&7.5's tss were  getting 145 ish @40 and the 9's was around 280? Again I'm trying to remember here but you won't be disappointed with any of the ones mentioned. I hope this helped you

[Fullfan]

My son and each have a X3-long beard 20, he shoots an Indian Creek .555 and I shoot a Truelock .585. My son likes em tight at 40 where I like some wiggle room.  We shoot Ronnys LIL Hammer load.

[Buckrub]

 I, too, like the IC 555 out of my sx3.  Got it last season and was using Longbeard, at the time, and "smashed" 2 birds !!!  Patterned it with TSS this year and the IC 555 really did well !!!

[kwild835]

I would go with .585 Carlson's.  SX3 20 gauge bore is .630 instead of the normal .620 for most 20s.  .555 would be smokin tight.   With Tss 9's 1 5/8oz handload the .585 did 320 in 10"/220 in 20" in my SX3 and did 280 in 10" and 250 in 20" with my brother's Browning Gold 20.

[Yelper]

I like that 585 choke. I am going to start with a Carlson 575 choke and go from there. I don't like the pattern to tight either.