OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store

Sum Toy
Dave Smith
Wood Haven
DC Cattle Ranch






Author Topic: New SP-10 Owner Questions  (Read 3407 times)

Offline ChiefBubba

  • 2018 SITE SUPPORTER
  • Hero Member
  • ********
  • Posts: 487
New SP-10 Owner Questions
« on: October 23, 2019, 12:59:49 PM »
I just got the 23” barrel in Old school Bottom Land. Gun Smith just went through it. It was very crummy. Barrel cleaned nice as well as the rest of the gun. Choke tube is stuck. He tried oil it but no go. I’m worried about soaking the barrel and tube in oil because of the Camo. Has anyone ever soak a Camo gun for a long time? Could I find another barrel? Thanks Bubba

Offline AT

  • Sr. Member
  • **
  • Posts: 155
Re: New SP-10 Owner Questions
« Reply #1 on: October 25, 2019, 10:08:35 PM »
Have you tried kroil? Used it on a buddy’s gun with the same problem.

Offline 1iagobblergetter

  • 2019 SITE SUPPORTER
  • Paintbrush Beard
  • ********
  • Posts: 3146
Re: New SP-10 Owner Questions
« Reply #2 on: October 26, 2019, 06:29:39 PM »
I would also spray it with a real good gun oil and try to keep it from getting or sitting on the paint..
I myself wouldn't chance letting it soak in anything.

Offline 4nolz2

  • Hero Member
  • ***
  • Posts: 281
Re: New SP-10 Owner Questions
« Reply #3 on: October 26, 2019, 08:51:08 PM »
Good gunsmith can handle fixed choke tube

Offline the Ward

  • 2020 SITE SUPPORTER
  • Longbeard
  • ********
  • Posts: 1219
  • They burn guns don't they?
Re: New SP-10 Owner Questions
« Reply #4 on: October 28, 2019, 01:02:33 PM »
Maybe you could try plugging choke end of the barrel with some kind of rubber plug and then filling inside of barrel with some kroil or solvent. Stand barrel up on end and let it soak awhile. That would keep camo finish safe i would think, just put some rags down so when it starts seeping past the choke and barrel it doesn't make a mess.

Offline Kytomgetter

  • Sr. Member
  • **
  • Posts: 177
Re: New SP-10 Owner Questions
« Reply #5 on: January 25, 2020, 10:26:39 PM »
I thought the same thing about plugging the end of the barrel and soaking it from the inside. I think you’d be hard pressed finding a barrel, and if you do I’m sure you’ll pay for it.