OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: I need a gunsmith recommendation  (Read 2669 times)

Offline 4nolz2

  • Hero Member
  • ***
  • Posts: 351
I need a gunsmith recommendation
« on: April 22, 2019, 07:31:07 PM »
I have a side by side Leige 10 gauge.The receiver is loose at the butt stock.I suspect more than just loose possibly a wood problem.

Offline 4nolz2

  • Hero Member
  • ***
  • Posts: 351
Re: I need a gunsmith recommendation
« Reply #1 on: April 22, 2019, 07:32:29 PM »
2nd view

Offline 4nolz2

  • Hero Member
  • ***
  • Posts: 351
Re: I need a gunsmith recommendation
« Reply #2 on: April 22, 2019, 07:33:46 PM »
With hand pressure the gap can be closed

Offline Old Gobbler

  • Administrator
  • Long Spur Gobbler
  • *****
  • Posts: 5088
Re: I need a gunsmith recommendation
« Reply #3 on: April 28, 2019, 12:24:11 PM »
Is the stock cracked beneath the tape or camo job ?

If so... take the stock off and see if you can reglue and clamp up
:wave:  OG .....DRAMA FREE .....

-Shannon

Offline 4nolz2

  • Hero Member
  • ***
  • Posts: 351
Re: I need a gunsmith recommendation
« Reply #4 on: April 29, 2019, 06:54:19 PM »
No not cracked under the dip.I found a smith that thinks he can tighten what he can and bed the stock and reciever