OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: M3020 factory turkey choke federal 3rd degree with TSS blend.  (Read 3859 times)

Offline erikmcgarrh

  • Full Member
  • *
  • Posts: 90
M3020 factory turkey choke federal 3rd degree with TSS blend.
« on: February 24, 2019, 01:03:57 PM »
Hopefully this will help someone


Sent from my iPhone using Tapatalk

Offline erikmcgarrh

  • Full Member
  • *
  • Posts: 90
Re: M3020 factory turkey choke federal 3rd degree with TSS blend.
« Reply #1 on: February 24, 2019, 09:31:48 PM »
Hopefully this will help someone


Sent from my iPhone using Tapatalk




Sent from my iPhone using Tapatalk

Offline surehuntsalot

  • Long Spur Gobbler
  • ******
  • Posts: 7433
  • Mendenhall,Mississippi
Re: M3020 factory turkey choke federal 3rd degree with TSS blend.
« Reply #2 on: February 25, 2019, 09:07:01 AM »
good to know, getting ready to go out with my 3020 and try some different chokes
it's not the harvest,it's the chase

Offline erikmcgarrh

  • Full Member
  • *
  • Posts: 90
Re: M3020 factory turkey choke federal 3rd degree with TSS blend.
« Reply #3 on: February 25, 2019, 03:59:34 PM »
good to know, getting ready to go out with my 3020 and try some different chokes
The factory has done fine with Mag Blends,Tss #9’s and the original 3rd degree


Sent from my iPhone using Tapatalk

Offline GomerPyle

  • Sr. Member
  • **
  • Posts: 105
Re: M3020 factory turkey choke federal 3rd degree with TSS blend.
« Reply #4 on: April 12, 2019, 09:56:50 AM »
With the 3000 and 3500's, there was an issue where HTL shot would make the factory turkey choke expand inside the barrel, making it difficult or impossible to remove. Is that not the case with the 3020 turkey choke?
[From a buddy re: turkey hunting]
"the best advice I can give you is to run from it like it's crystal meth"

Offline erikmcgarrh

  • Full Member
  • *
  • Posts: 90
Re: M3020 factory turkey choke federal 3rd degree with TSS blend.
« Reply #5 on: April 12, 2019, 09:59:07 AM »
With the 3000 and 3500's, there was an issue where HTL shot would make the factory turkey choke expand inside the barrel, making it difficult or impossible to remove. Is that not the case with the 3020 turkey choke?
I’ve shot a lot through my m3020 with no problems zero hiccups


Sent from my iPhone using Tapatalk

Offline VAarrowslinger

  • The Boss Gobbler
  • ****
  • Posts: 571
Re: M3020 factory turkey choke federal 3rd degree with TSS blend.
« Reply #6 on: April 12, 2019, 08:49:04 PM »
Is that a 40yd pattern?

Sent from my SM-T380 using Tapatalk


Offline erikmcgarrh

  • Full Member
  • *
  • Posts: 90
Re: M3020 factory turkey choke federal 3rd degree with TSS blend.
« Reply #7 on: April 12, 2019, 11:03:55 PM »
Is that a 40yd pattern?

Sent from my SM-T380 using Tapatalk
Yes that’s 40 on a range finder, seems like this shell doesn’t like a tight constricting choke.


Sent from my iPhone using Tapatalk

Offline ahfox16

  • Hero Member
  • ***
  • Posts: 278
Re: M3020 factory turkey choke federal 3rd degree with TSS blend.
« Reply #8 on: April 14, 2019, 06:09:15 PM »
I shot that shell with a 562 and a 567 Sumtoy and it was god awful at 40 yards.  I would have had a hard time using it at 30 yards.  PS. That was out of a 870.

Offline edward.penny

  • Sr. Member
  • **
  • Posts: 109
Re: M3020 factory turkey choke federal 3rd degree with TSS blend.
« Reply #9 on: April 14, 2019, 06:31:11 PM »
I tried these in a 12 gauge last year out of several different chokes. Never made it past 30 yards. The patterns fell apart in my gun.

Sent from my moto g(6) (XT1925DL) using Tapatalk


Offline erikmcgarrh

  • Full Member
  • *
  • Posts: 90
Re: M3020 factory turkey choke federal 3rd degree with TSS blend.
« Reply #10 on: April 14, 2019, 09:02:19 PM »
M3020 has shot everything pretty good my condor 20 wouldn’t pattern them at all


Sent from my iPhone using Tapatalk