OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store

Sum Toy
Dave Smith
Wood Haven
DC Cattle Ranch






Author Topic: Synthetic Stock for NEF/H&R 10  (Read 1203 times)

Offline mmorgan9812

  • 2019 SITE SUPPORTER
  • Sr. Member
  • ********
  • Posts: 120
Synthetic Stock for NEF/H&R 10
« on: January 19, 2019, 08:03:42 AM »
Looking for synthetic stock for NEF or H&R 10 Gauge.. I don't think any I am seeing fit, they only fit 12 ga.


Anyone have any idea's were to get one? Mine is SB2

Offline Roost 1

  • Longbeard
  • ****
  • Posts: 1662
Re: Synthetic Stock for NEF/H&R 10
« Reply #1 on: January 20, 2019, 03:25:40 PM »
I have one that fits SB2 rifle I’ll sale if it will work. It’s the thumbhole type.
CRUSADERS
2016-2017-2018-2019 four time Old Gobbler Contest Champions

[/img]

Offline HoutzNWTF

  • Full Member
  • *
  • Posts: 28
Re: Synthetic Stock for NEF/H&R 10
« Reply #2 on: January 29, 2019, 12:33:32 PM »
The H&R/NEF handi-grip stock set works. The stock fits perfect but the forearm needs to be opened up to fit the fat barrel. I used fine grit sand paper wrapped around a socket. It takes about 2 pounds off the total weight of the gun and greatly increases the felt recoil.

Offline mmorgan9812

  • 2019 SITE SUPPORTER
  • Sr. Member
  • ********
  • Posts: 120
Re: Synthetic Stock for NEF/H&R 10
« Reply #3 on: January 31, 2019, 06:17:17 PM »
Thanks! Was unsure to order afraid it wouldn't work. You have a picture?

Offline HoutzNWTF

  • Full Member
  • *
  • Posts: 28
Re: Synthetic Stock for NEF/H&R 10
« Reply #4 on: February 03, 2019, 12:52:50 AM »
Yes I do have a couple pictures but this forum will not let me post them because they are too large apparently. I have never successfully got a picture to post here....   I can email them or text them if you want me to. Just let me know.

Offline HoutzNWTF

  • Full Member
  • *
  • Posts: 28
Re: Synthetic Stock for NEF/H&R 10
« Reply #5 on: February 01, 2020, 05:36:25 PM »
Well I know this post is a year old...  but did you end up finding what you were looking for??