OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store

Sum Toy
Dave Smith
Wood Haven
DC Cattle Ranch






Author Topic: Jeb’s chokes  (Read 925 times)

Offline bsp212

  • Jr. Member
  • *
  • Posts: 7
Jeb’s chokes
« on: January 08, 2019, 10:28:29 PM »
Ported or non ported? Is there a difference in patterns? This may be like beating a dead horse, but I’m new here and the search function didn’t turn up anything helpful for me.

Offline Gobbler428

  • 2019 SITE SUPPORTER
  • Sr. Member
  • ********
  • Posts: 134
  • Spurs Up
Re: Jeb’s chokes
« Reply #1 on: January 09, 2019, 03:40:27 PM »
I ran a non ported JEBS on a BPS with a 26" barrel for 10+ years and last year bought a SBE2 with a 26" barrel and put a ported JEBS 655 on it, both of them threw great patterns. Since I had them on two different guns, it makes it very difficult' if not impossible to compare the two.  I would suggest that you call JEBS, tell them what you have and ask their opinion on this.  They are really great guys to deal with and I am sure will give you an honest answer. They know their chokes and how they perform on various guns, barrel lengths etc.

Offline davisd9

  • Long Spur Gobbler
  • ******
  • Posts: 5020
Re: Jeb’s chokes
« Reply #2 on: January 09, 2019, 03:48:12 PM »
What shell?


Sent from my iPhone using Tapatalk

"I wish I could breathe life back in him, if I could I'd hunt him again tomorrow." Ben Rogers Lee

Offline bsp212

  • Jr. Member
  • *
  • Posts: 7
Re: Jeb’s chokes
« Reply #3 on: January 09, 2019, 07:01:16 PM »
I ran a non ported JEBS on a BPS with a 26" barrel for 10+ years and last year bought a SBE2 with a 26" barrel and put a ported JEBS 655 on it, both of them threw great patterns. Since I had them on two different guns, it makes it very difficult' if not impossible to compare the two.  I would suggest that you call JEBS, tell them what you have and ask their opinion on this.  They are really great guys to deal with and I am sure will give you an honest answer. They know their chokes and how they perform on various guns, barrel lengths etc.

Thanks for the advice. I really never thought about calling, just kinda figured they would be too busy for stuff like that.

Offline bsp212

  • Jr. Member
  • *
  • Posts: 7
Re: Jeb’s chokes
« Reply #4 on: January 09, 2019, 07:05:56 PM »
What shell?


Sent from my iPhone using Tapatalk

I’m not dead set on anything yet. I’m going to buy a few boxes of several and go pattern them soon. Just thought I would get another choke first. Something a little tighter than the RR since I’m running a 18.5” barrel. I haven’t had any experience with ported chokes so I really don’t know the difference. If it’s for recoil reduction, i doubt it makes a difference.

Offline Gobbler428

  • 2019 SITE SUPPORTER
  • Sr. Member
  • ********
  • Posts: 134
  • Spurs Up
Re: Jeb’s chokes
« Reply #5 on: January 09, 2019, 07:28:11 PM »
Give them a call, they will be glad to help you. I've spoken with them several times and they are very helpful.

Offline BINK McCARTY

  • Hero Member
  • ***
  • Posts: 412
  • Beak first in th' dirt...
Re: Jeb’s chokes
« Reply #6 on: February 04, 2019, 10:03:10 PM »
What shell?


Sent from my iPhone using Tapatalk

I’m not dead set on anything yet. I’m going to buy a few boxes of several and go pattern them soon. Just thought I would get another choke first. Something a little tighter than the RR since I’m running a 18.5” barrel. I haven’t had any experience with ported chokes so I really don’t know the difference. If it’s for recoil reduction, i doubt it makes a difference.
  Not sure how tight you're lookin for but I have a Rob Roberts .640 if you might be interested.