OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Acrylic Striker Conditioning?

Started by Turkeytider, September 04, 2018, 03:28:20 PM

Previous topic - Next topic

Turkeytider

Pretty new to pots and strikers. I know about conditioning wood strikers, but do you also have to rough up the tips of acrylic strikers or do they play without it? Thanks in advance for any advice.

Sir-diealot

I posted this a second ago and then removed it because I realized you were asking specifically about acrylic and kinda doubted myself. I will post it again because it would still seem to make sense but please wait for one of the others that know more than I to reply before you do anything.

They will play without it but sometimes you will build up a residue on them and have to lightly clean them. I have always done it very lightly on a Scotch Bright pad or a very I believe it would be high grit sandpaper. Sorry not good which what sandpaper is which but not the really rough stuff, the kind that I would say is sandier if that makes any sense. Not what you would start a wood project off with but the really fine stuff you would use at the end. Others here will explain it better than I am. I hope this helps or at least gave you a laugh at my expense.
Strength does not come from winning. Your struggles develop your strengths. When you go through hardships and decide not to surrender, that is strength. Arnold Schwarzenegger

John Koenig:
"It's better to live as your own man, than as a fool in someone else's dream."

Turkeytider

Quote from: Sir-diealot on September 04, 2018, 03:56:18 PM
I posted this a second ago and then removed it because I realized you were asking specifically about acrylic and kinda doubted myself. I will post it again because it would still seem to make sense but please wait for one of the others that know more than I to reply before you do anything.

They will play without it but sometimes you will build up a residue on them and have to lightly clean them. I have always done it very lightly on a Scotch Bright pad or a very I believe it would be high grit sandpaper. Sorry not good which what sandpaper is which but not the really rough stuff, the kind that I would say is sandier if that makes any sense. Not what you would start a wood project off with but the really fine stuff you would use at the end. Others here will explain it better than I am. I hope this helps or at least gave you a laugh at my expense.

No, no that`s fine! Appreciate all the help I can get!  Thanks.

Sir-diealot

Quote from: Turkeytider on September 04, 2018, 07:19:41 PM
Quote from: Sir-diealot on September 04, 2018, 03:56:18 PM
I posted this a second ago and then removed it because I realized you were asking specifically about acrylic and kinda doubted myself. I will post it again because it would still seem to make sense but please wait for one of the others that know more than I to reply before you do anything.

They will play without it but sometimes you will build up a residue on them and have to lightly clean them. I have always done it very lightly on a Scotch Bright pad or a very I believe it would be high grit sandpaper. Sorry not good which what sandpaper is which but not the really rough stuff, the kind that I would say is sandier if that makes any sense. Not what you would start a wood project off with but the really fine stuff you would use at the end. Others here will explain it better than I am. I hope this helps or at least gave you a laugh at my expense.

No, no that`s fine! Appreciate all the help I can get!  Thanks.
You're welcome
Strength does not come from winning. Your struggles develop your strengths. When you go through hardships and decide not to surrender, that is strength. Arnold Schwarzenegger

John Koenig:
"It's better to live as your own man, than as a fool in someone else's dream."

mastevt

When I make my acrylic strikers, the tips are polished down in steps, wet sanded to 2000.  And never have to be touched after that.  That said, if for some reason, one has to be dressed, your probably gonna have a hard time getting the tip polished to a glass like appearance without A lathe.  The things I like about acrylic is, you don't have to dress them, they run wet, and they play very well on glass, ceramic, and all of your metal surfaces, where some woods can be difficult to get to run.