OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: maxus and tss  (Read 1899 times)

Offline TURKEY MASTER

  • Full Member
  • *
  • Posts: 40
maxus and tss
« on: August 05, 2018, 08:32:29 PM »
What choke y'all running through your maxus with tss.

Offline BrowningGuy88

  • Longbeard
  • ****
  • Posts: 1361
Re: maxus and tss
« Reply #1 on: August 05, 2018, 09:55:09 PM »
I have an Indian Creek 665 and a SumToy 672. They both do well with 1.75 ounce of TSS.

There are others here who have shot a lot more chokes and loads than me and they range from 665 to 696 constriction.

Offline TURKEY MASTER

  • Full Member
  • *
  • Posts: 40
Re: maxus and tss
« Reply #2 on: August 12, 2018, 09:12:10 PM »
how do you think a sumtoy 675 would do with straight 9's

Offline BrowningGuy88

  • Longbeard
  • ****
  • Posts: 1361
Re: maxus and tss
« Reply #3 on: August 13, 2018, 12:06:43 PM »
how do you think a sumtoy 675 would do with straight 9's

Bad to the bone

Offline chipper

  • The Boss Gobbler
  • ****
  • Posts: 505
Re: maxus and tss
« Reply #4 on: August 19, 2018, 11:54:41 AM »
The barrel internals are a little different in between the maxus and my SX3 but shooting a 8x9 stacked 2 ounce load in my sx3 with a .665 Indian Creek resulted in a extremely dense pattern,  I think I had 370 in the 10" but a sparse 20", I opened mine up to a .690 Hastings and ended up with a more even 10 and 20 inch pattern with a slightly more dense 10 inch center core, 315/ 270, but I also went to a 2 oz. Load of straight #9  to get those numbers.

Offline SumToy

  • Double Beard
  • *****
  • Posts: 2223
    • sumtoycustoms
Re: maxus and tss
« Reply #5 on: August 20, 2018, 10:06:05 AM »
665 for a hot pattern and 670 for open up some.  675 kill all day long if you not wanting to just run over him with a truck  :TrainWreck1:
Tell us just how dead do you want them to be and we will see if we can get that for you.
Building American made products with American made CNC's and Steel.  Keep all the service Men and Women that gave a LIFE for our FREEDOM a live when you buy American.  God Bless the USA


Offline kwild835

  • The Boss Gobbler
  • ****
  • Posts: 812
Re: maxus and tss
« Reply #6 on: August 22, 2018, 09:49:42 AM »
I would try out a .680 Carlson's.  Killer in my invector plus guns.

Offline KentuckyLB

  • Sr. Member
  • **
  • Posts: 113
Re: maxus and tss
« Reply #7 on: December 11, 2018, 08:24:57 AM »
Old thread, but im running a IC 665 with 2 5/8 oz 8x9 in the 460`s10 inch circle ...very hot core but that's what I like this out of a SX4...